2.Adjust the guides. Insert a sheet of paper until the printer grips it. When using letterhead paper, insert letterhead in first, face up.
3.Set your software application for manual feed and paper size, then issue print command.
Transparencies/Adhesive Labels
•Always use Manual Feed
•Always use rear output.
•Media should be specifically made for laser printers or photocopiers.
•Must be able to withstand 200°C for 0.1 sec.
•Labels should cover entire carrier sheet.
•Carrier sheet or adhesive must not be exposed to any part of the printer.
English
Read Me First | 17 |