Quick Start: OKI® MICROLINE® 500 Series*
Customizing the Installation
This document tells you how to perform a typical installation, using the factory settings of the printer.
You may need to adjust settings to fit your requirements, such as:
Item | Factory Setting | To Change, see |
|
|
|
Top of Form (TOF) | 1" from top | Page 2 of this document |
|
|
|
Form | OFF | |
|
| ML520 Series: page 32 |
|
| ML590 Series: page 21 |
|
|
|
Printhead Gap | Automatic | Head_Gap.pdf on the CD |
|
|
|
The User’s Guide
The User’s Guide is provided as an Adobe ® Acrobat® PDF file on the CD shipped with your printer. It requires Adobe Acrobat Reader for viewing. To view the User’s Guide, browse to it in your product line folder on the CD and double click the file name.
If you do not have Adobe Acrobat Reader, it is provided on the CD or you may download it from the Adobe web site, www.adobe.com.
!Documentation is also available via Oki Data’s web site, www.okidata.com.
Installation
Getting Started
1Unpack your machine. Keep the packing materials and carton in case you ever need to ship or transport your printer.
2Remove shipping restraints (1, 2) and protective film (3, 4).
3Open the access cover, center the printhead (1), and install the ribbon, rotating the knob (3) to take up any slack.
1
Leave the |
|
|
|
! ribbon shield (2) | 2 |
|
|
|
| ||
|
|
| |
on the cartridge! |
|
|
|
|
|
|
|
3
4Install any accessories you purchased. Refer to the instructions provided with each accessory.
5Connect to the computer and the power outlet (computer and printer both OFF).
6 Turn the computer and printer on.
1 | 2 |
3 | 4 |
* Models ML520, ML521, ML590 and ML591