Tools of the Trade

Power for systems with a single amplifier can be supplied by most automotive electrical sys- tems. Systems with multiple amplifiers may require a higher capacity battery, alternator or the use of a storage capacitor. We strongly recommend the use of a Directed Audio Essentials power capacitor with an extra battery in larger stereo systems.

Orion amplifiers generate a certain amount of heat as part of normal operation. Be sure the area around the amplifier is unobstructed to allow adequate air circulation. Remember, beach blankets, last week's laundry, school books and homework papers located on top of the amplifier do not improve air flow and may become damaged.

Listed below are the majority of the tools required to perform an installation. Having the proper tools will make the installation that much easier. Some of these tools are necessities; some will just make the job easier.

●Allen Wrenches (2.5mm and 3mm)

●DMM or VOM

●Electric drill with assorted drill bits

●Grommets

●Heat shrink tubing

●Marking pen

●Nylon tie straps

●Phillips and flat blade screw drivers

●Pliers (standard and needle nose)

●Reference CD with 1 kHz Sine Wave at 0dB level (all bits high)

●RTA (real time analyzer)

●Soldering iron and solder

●Utility knife

●Wire brush or sandpaper for chassis grounding

●Wire crimper

●Wire cutters

●Wire strippers

Step By Step Installation

Step 1 Determine the location for the amplifier. Refer to the Choosing Mounting Locations section of this guide for detailed information.

Step 2 Decide on the system configuration for your amplifier. For system sugges- tions, refer to the Speaker Connections section of this guide.

Step 3 Run all the wires from the amplifier location to the speakers, source unit, and battery. Do not connect the battery at this time. Be sure to run RCAs and power and speaker wires away from factory electrical wires and system as they pose a great potential for induced system noise.

Step 4 Pre-drill amplifier mounting holes. Be sure to "think before you drill". Gas tanks, fuel lines, and other obstructions have a nasty way of hiding them- selves. For best results use a marking pen to mark the mounting holes and pre-drill these holes with a standard 1/8" drill bit.

Step 5 Mount the amplifier. Make sure the amplifier is mounted on a flat surface. If this is not possible, do not over tighten the screws so that the chassis of the

4002, 6002 specifications

Orion Car Audio is a renowned brand in the automotive audio industry, known for its commitment to producing high-performance sound systems that elevate your driving experience. Among their standout products are the Orion Car Audio 6002 and 4002 amplifiers, which pack a punch with a multitude of innovative features and technologies designed for audiophiles and casual listeners alike.

The Orion Car Audio 6002 amplifier offers an impressive power output, delivering 600 watts of peak power. This two-channel amplifier is designed to drive your speakers efficiently, ensuring that you experience clear and powerful sound without sacrificing quality. One of its standout features is the variable low-pass filter, which allows users to adjust the frequency response to suit their specific audio preferences. The adjustable bass boost also enhances low-end frequencies, enabling a rich and deep bass experience that is perfect for various music genres.

On the other hand, the Orion Car Audio 4002 amplifier is a more compact option, yet it doesn't compromise on performance. Offering 400 watts of peak power, this dual-channel amplifier is ideal for smaller setups or when space is limited. It also features a variable low-pass filter and bass boost control, allowing for a customized audio experience that complements the listener's taste.

Both the 6002 and 4002 amplifiers are constructed with high-quality components that ensure durability and longevity. They feature thermal and short-circuit protection, safeguarding the amplifiers from potential damage during high-output sessions. This robustness makes them suitable for challenging environments, such as a vehicle's interior, where heat and vibrations can be prevalent.

Another essential aspect of both amplifiers is their high-level input capability, which allows for easy integration with factory systems without the need for additional converters. This feature ensures seamless upgrades for those looking to enhance their existing sound systems.

In summary, the Orion Car Audio 6002 and 4002 amplifiers offer a dynamic blend of power, flexibility, and durability. With their impressive wattage, adjustable controls, and robust construction, these amplifiers represent a great choice for anyone passionate about quality audio on the road. Whether you are upgrading an existing setup or building a new one from scratch, Orion Car Audio amplifiers set the benchmark for performance and versatility in car audio systems.