Adjusting the Sound of the System

Once you have checked the system's operation, adjust the sound of the system. Adjusting the sound of the system is accomplished by setting the level controls and adjusting the internal crossovers.

Step 1 Turn the signal source volume control all the way down. Set any tone con- trols to their flat or defeated positions. This includes the loudness control.

Step 2 Turn the level controls of the amplifier to their minimum positions.

Step 3 Choose music with high dynamic content that you like, with which you are familiar, and will be used most often in the system.

Step 4 Turn the source unit's volume control up to its highest undistorted output level. If you lack test equipment, this point occurs between 3/4 to full volume depending on the quality of your source unit. Listen for any audible distor- tion. If any distortion is audible, reduce the volume of the source unit until you have an undistorted output. Leave the volume control at this position during your system tuning.

Step 5 While listening to your chosen dynamic music, turn up the level control cor- responding to the midrange output until you hear slight distortion and turn the level control back slightly for an undistorted output. Depending on your system, the midrange and tweeter output may be on the same output chan- nels.

Step 6 Turn up the level control corresponding to the tweeter output until you hear slight distortion and turn back the level control slightly for an undistorted output. Depending on your system the midrange and tweeter output may be on the same output channels.

Step 7 Fine-tune the output level between midrange and tweeters. Refer to the Internal Crossover Configuration section of this manual for detailed instruc- tions.

Step 8 Repeat Steps 5-7 for the rear speakers. If you do not have rear speakers con- tinue to Step 10.

Step 9 Set levels between the front and rear midrange and tweeters for optimum front/rear balance.

Step 10 Turn up the level control corresponding to the woofer output until you hear slight distortion and turn back the level control slightly for an undistorted output.

Step 11 Fine-tune the output level between satellite speakers and the woofers. Refer to the Internal Crossover Configuration section of this manual for detailed instructions. If using an RGC-1, adjust the level to the output of the woofer to match the sonic requirements of the system.

Step 12 Enjoy your awesome Orion sound system.

16	©2003 Directed Electronics, Inc.

8002 specifications

Orion Car Audio 8002 is a high-performance amplifier designed for car audio enthusiasts seeking powerful sound and exceptional clarity. This amplifier is renowned for its impressive output and efficient design, making it a top choice for those looking to enhance their in-car audio experience.

One of the standout features of the Orion 8002 is its robust power output. With a maximum output of 800 watts, this amplifier can easily drive multiple speakers and subwoofers, delivering a rich and immersive sound experience. It operates in a bridgeable configuration, allowing users to combine its channels for even more power, ideal for those who want to support larger, more demanding audio setups.

The Orion 8002 is equipped with advanced technologies that contribute to its superior audio quality. Its MOSFET power supply ensures efficient performance, reducing distortion and allowing for better dynamic range. This translates to clear, crisp highs and deep, resonant lows that bring music to life, making it suitable for a variety of music genres.

One of the key characteristics of the Orion 8002 is its versatile input options. It features both low-level RCA inputs and high-level speaker inputs, making it compatible with various head units and systems. This flexibility allows users to easily integrate the amplifier into their existing car audio system without the need for extensive modifications.

Additionally, the Orion 8002 comes with built-in crossover filters, providing users the ability to tailor the sound output to their specific needs. The adjustable high-pass and low-pass filters ensure that the amplifier can optimize performance according to the specific speakers or subwoofers being used.

The design of the Orion 8002 is not only functional but also stylish. Its sleek chassis is built to withstand the rigors of car environments, with a durable finish that complements any vehicle interior. Its compact size allows for straightforward installation in various locations within the car, ensuring users can find the perfect fit for their setup.

In conclusion, the Orion Car Audio 8002 amplifier combines powerful output, advanced technologies, and flexible features to deliver an outstanding listening experience. Whether upgrading an existing system or building a new one, the Orion 8002 stands out as a strong option for audiophiles seeking quality and performance in their car audio setup.