Sawgrass Technologies, Inc. SubliJet IQ® Getting Started Guide for the EPSON Stylus D88
3.Remove the lid from the box and place it to the side.
4.Clamp the tubes at the end of each line before you clip on each bag to prevent ink from entering them. Insert the ink bags into the ink box by clipping them into the connectors inside each chamber. All chambers are labeled with the corresponding color for each ink bag.
Remember to match the
right color ink to its
corresponding cartridge chamber. Once the tube is filled, there is no way to undo it!
5.Once all ink bags are connected inside your Quick Connect II™ ink box, you will need to obtain the small primer bottle to prime each line.
6.Take the cartridge in one
hand and the priming bottle in the other. Squeeze the priming bottle to release all of the air and insert it into the bottom of the cartridge to pull ink through the line until a small amount of it reaches the reservoir.
10