Please pay attention to the ink level in the reservoirs; if the ink level is below 1CM as the above picture shown, please use refill kits to fill ink into Reservoir bottles. Carefully pull out the rubber plugs from the refill holes.(there is possibility of ink spattering. Be careful!) Refill ink according to the color in short supply. Then put the rubber back. (Please keep the printer and the reservoir at the same horizontal line during the process of refilling ink.)
6.How to install the cover of cartridge:
Pls first install the left side of |
| Then install the other side | Adjust well the joint position |
the cover into |
|
|
|
|
|
|
|
|
|
|
|
Press the right side of cover | Finished |
to make it install well |
|
7、Attention for maintenance:
Take out the CISS including the inner cartridges and other components. Then remove support arm from printer, and place the original cartridges in. Please inquire local dealer before sending to maintenance.