Installation of MB-C10, Installation of C-10SW

ITEM 1	ITEM 2
Figure 1	Figure 2

The MB-C10 mounting bracket contains eight (8) short screws (Item 1) and eight

(8) longer screws (Item 2).

INSTALLATION OF MB-C10

The MB-C10 consists of five separate pieces and two different types of screws. There are two pairs of steel mounting rails supplied. One pair 14.5” long to span 16” OC members and one pair 22.5” long to span 24” OC members. These fasten to the framing members with screws (Item 2) as shown in Figure 2. The appropriately sized set of rails for 19.2 OC framing is available separately (MBR-192).

Mount the white plastic bracket to the appropriate set of rails with the shorter screws (Item 1 in Figure 1). Place the white plastic bracket in the middle position and tighten the screws.

Put the assembly in position between the rafters and fasten with the longer screws (Item 2 in Figure 1). Make sure that the room-side of the rails are flush with the rafters.

Now that the steel mounting rails are fastened to the rafters and spaced properly, the position of the mounting bracket along the rails can be

adjusted. When used with 24” OC framing members there is considerable space to slide the round plastic mounting frame back & forth on the rails to the desired location; installations into 16” OC provide little space for adjustment.

INSTALLATION OF C-10SW

Remove the grille with the included Grille Removal Tool. Cut the white film out of the mounting bracket with a utility knife.

Connect the speaker wires and place the C-10SW up into the ceiling by holding the black steel installation handle. Use the guides shown below in Figure 3 to align the speaker frame with the mounting bracket.

Attach the speaker to the mounting bracket with the four black screws that are included with the C-10SW.

Remove the installation handle by loosening the two screws that hold it in place and turning it so that the screw heads pass through the keyhole openings.

Tighten the two screws that held the handle in place.

Attach the grille with spun cellulose insert. The white insert goes between the driver and the grille to improve the appearance.

CAUTION: THIS INSTALLATION HANDLE MUST BE REMOVED BEFORE THE SUB IS ACTIVATED

Leave the white film that covers the mounting opening in place until you are ready to install the C-10SW.

Figure 3

C-10SW, MB-C10 specifications

OEM Systems MB-C10 and C-10SW are versatile and powerful options in the realm of embedded systems, prominently utilized in various industrial and consumer applications. These systems are designed to meet diverse operational demands, delivering high performance while maintaining efficiency and reliability.

The MB-C10 model is engineered with a robust architecture, featuring a processor that offers enhanced computational capabilities. This allows it to handle multiple complex tasks simultaneously. One of its key characteristics is its exceptional integration of I/O interfaces, making it easy to connect with a variety of peripherals and devices. This system supports different forms of connectivity, ensuring that it can communicate seamlessly with other equipment in a networked environment.

The C-10SW variant, on the other hand, is optimized for mobile and portable applications. It is lightweight and compact, making it an ideal choice for scenarios where space is a constraint. A significant feature of the C-10SW is its power management technology, enabling extended battery life without compromising performance. This makes it suitable for use in handheld devices, remote monitoring systems, and other applications that require mobility.

Both models incorporate advanced security protocols to protect sensitive data and prevent unauthorized access. This is particularly important in industries such as healthcare, finance, and manufacturing, where data integrity and confidentiality are paramount. The systems are designed with compliance to various industry standards, ensuring that they can be deployed in global markets without issues relating to compatibility or regulatory requirements.

Furthermore, OEM Systems MB-C10 and C-10SW are built for durability, catering to harsh environments. They are equipped with temperature resistance and can withstand vibrations, which is crucial for industrial applications.

In terms of software support, both models are compatible with a range of operating systems and are designed to facilitate easy integration with existing software infrastructures. This flexibility enables developers to customize applications based on specific needs, significantly reducing time-to-market for new products.

In summary, OEM Systems MB-C10 and C-10SW deliver a powerful combination of performance, connectivity, portability, and security, making them ideal solutions for various demanding applications. Their robust design and advanced features position them as leading choices for businesses looking to enhance their operational efficiency.