Getting Started
Attaching feet to your subwoofer
Your MS907W subwoofer comes with feet and spikes which must be fitted to space the
The spikes attach to the bottom of the feet (as shown below left).
There are eight pilot holes on the bottom of the speakers. The feet are located and secured here with the wood screws supplied (below right). Level as required.
Connecting via Line Input
If your amplification system has a dedicated subwoofer line output then you should connect your MS907W via the Line Input on the rear panel using a good quality phono lead. Note that if your amplification system has a mono subwoofer line out then use the Left/Mono socket on your MS907W.
Connecting via High Level Connections
Do not compromise the performance of your system by using inferior quality cables!
Observing polarity is of the utmost importance while connecting your loudspeakers. Ensure that the red (+) terminals on your amplification system are connected to the red (+) on the subwoofer, and black
Running In
Your new unit will require a total of approximately 10 hours of normal use to allow the components to settle into their working routine and reach their optimum performance.
Important Note: Always unplug all A.C. powered components before making any loudspeaker or component connections. This will avoid the risk of electric shock or damage to your equipment
8