Canon Printer manual Vacuum Strength Setting Strongest, Weak, Cut Speed Setting Standard, Fast

Page 24

Media Configuration Tool Guide Chapter 4 Adding Media Types

Media Thickness

Setting

 

 

Standard

For media that is a standard thickness

 

and has no problem printing.

Thin

Select this when the media set is thin, or

 

when the image is adversely affected.

6.From the Vacuum Strength list set the Vacuum Strength when printing a media type to be added.

The following settings are available for Vacuum Strength.

Vacuum Strength

Setting

 

 

Strongest

For media that does not settle even

 

when set to Strong.

Strong

For media that does not settle properly

 

because it curls.

Standard

For media that has no problems when

 

printed.

 

 

Weak

For thin media, or when the image on

 

the media is adversely affected.

7.From the Skew Error Detection Standard Values list set the standard which will cause a media slant detection error in the printer.

The following settings are available for Skew Error Detection Standard Values.

Skew Error Detection

Setting

Standard Values

 

 

 

1 mm, 2 mm, 3 mm, 4 mm,

Reduce the value for media used for

5 mm

documents where the precision rate is

 

important and for media where strict

 

detection of slants is required. Increase

 

the value for media that does not slant

 

much and for media that is used for

 

documents that allow for a degree of

 

slant.

8.Set the auto cut speed for media to be added from the Cut Speed list. The following settings are available for Cut Speed.

Cut Speed

Setting

 

 

Standard

For media that has no problem with

 

cutting.

 

 

Fast

For media that has problems, such as

 

inaccurate cutting with the Standard

 

setting.

 

 

9.Set the amount of media to purge after cutting the media type to be added in the Media Feed Amount After Cutting list.

The following setting are available for Media Feed Amount After Cutting.

Media Feed Amount After

Setting

Cutting

 

 

 

No

Does not purge media after cutting.

 

 

4-7

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Media Configuration Tool Guide ContentsHow to Use This Guide Before You BeginIii Installing and Starting the Media Configuration Tool Installation ProceduresOperating Environment Select Easy Install Procedures for Uninstalling Select Uninstall Starting the Media Configuration Tool Functions of the Media Configuration Tool Functions of the Media Configuration ToolOutline of the Media Configuration Tool Functions Detailed Settings of Media PropertiesUpdate Media Types Button Add Media Type ButtonContent Description Edit Media Type ButtonUpdating Media Information File Select the Media Information FilePage Select Printer to Update Update Media Type wizard moves to display Select PrinterCheck What Is to be Updated Page Adding Media Types Select Printer to be AddedInput Media Type Name Input Media Name p.4-3 Media Configuration Tool Guide Adding Media Types Input Media Name Media Name ConditionsInput Media Properties Near End Margin Setting 20 mmFar End Margin Setting 10 mmMiddle Standard LowerVacuum Strength Setting Strongest Cut Speed Setting StandardStrong WeakMedia Feed Amount After Setting Cutting 150 mm, 390 mm Add Media Type moves to display Confirm AdditionCheck Addition Select Add Media Type from OptionsMedia Configuration Tool Guide Adding Media Types Editing Media Types Select Printer to be EditedEdit Media Types Select Printer is displayed Edit Media Type Changing the Display Order of Media Types Changing the Name of the Media TypesType Displayed on Printer DriverDeleting a Media Type Media Configuration Tool Guide Editing Media Types Index Index-1Index-2
Top Page Image Contents