Specifications
High Reliability
•Unlimited read cycles
•SMART feature supported
•Dynamic and static
•Dynamic bad block management
•Advanced EDC/ECC
•No preventive maintenance
•Up to 4M mean time to failure (MTTF)** hours
High Performance
•Transfer modes supported: UMDA
•Sustained read: 39MB/s
•Sustained write: 17MB/s
Characteristics
•Interface: Parallel ATA (PATA)
•MLC NAND flash capacity: 4GB, 8GB, 16GB
Electrical Specifications
•DC supply voltage: 3.3V ±5%
•Standby current: 300μA (typical)
•Active current (typical):
Read = 130mA, Write= 120mA
Environmental Specifications
•Operating temperature: 0°C to +70°C
•Storage temperature:
•Operating altitude: up to 80,000 feet
•Humidity: 5% to 90%
•Shock: 1,000G
•Acoustic noise: 0dB
•Vibration: 15G (peak to peak)
Physical Specifications
•Connector:
•Weight: 4.9g (4GB), 5.5g (8GB), 7.0g (16GB)
•Dimensions: 54mmx32mmx2.5mm (4GB, 8GB) 54mmx32mmx3.75mm (16GB)
Regulations and Compliance
•RoHS, China RoHS, SGS RoHS, UL,
FCC, CE
OS Support
• XP, Linux
USA
OEMinfo@sandisk.com
Japan
OEMsalesjp@sandisk.com
Taiwan
OEMAsia@sandisk.com
China
OEMAsia@sandisk.com
Korea
OEMAsia@sandisk.com
Europe
CSDEMEA@sandisk.com
*1 gigabyte (GB) = 1 billion bytes; 1 megabyte (MB) = 1 million bytes; speed based on internal testing; performance may be lower depending on host device. Some capacity not available for data storage.
**Based on internal testing. The MTTF calculation does not take into account the disk endurance limita- tion. For the disk endurance, please refer to the endurance section in the product specification.
SanDisk and the SanDisk logo are trademarks of SanDisk Corporation registered in the United States and other countries. SanDisk pSSD is a trademark of SanDisk Corporation. Other brand names mentioned herein are for identification purposes only and may be trademarks of their respective holder(s).
©2008 SanDisk Corporation. 6/08
For more information, please visit www.sandisk.com/pssd
Product not available until August 2008.