MK Sound S-125C, S-85C Specifications, USE with AN Omnimount Bracket, Uses Omnimount 53-RST

S-125/S-125C/S-85/S-85Cpage 12

13. SPECIFICATIONS

	S-125 & S-125C	S-85 & S-85C
IMPEDANCE:	4 ohms	4 ohms
MINIMUM POWER:	10 watts RMS	10 watts RMS
RECOMMENDED POWER:
(applies to both models)	amplifiers with between 50 and 200 watts RMS or more (see below)
MAXIMUM POWER:
(applies to both models)	200 watts RMS unclipped peaks
FREQUENCY RESPONSE:	77 Hz - 20 KHz ± 2 dB	85 Hz - 20 KHz ± 2 dB
DIMENSIONS (H x W x D):
Left/Right speaker	18 1/2" x 6 1/4" x 8 1/4"	10 1/2" x 6 1/4" x 8 1/4"
Center Channel speaker	6 1/4" x 18 1/2" x 8 1/4"	6 1/4" x 10 1/2" x 8 1/4"
WEIGHT	16 lbs.	9 lbs.

FIGURE 3

USE WITH AN OMNIMOUNT ® BRACKET

The drawings below are from the OmniMount catalog and are not intended to show the actual dimensions and specific mounting locations on the S-125 and S-85. Please see the back baffles of your speaker cabinets.

S-125 and S-125C

USES OMNIMOUNT® 75-WA or 53-RST (see below)

Two threaded inserts are located at the bottom of the back baffle of the cabinet Mount the bracket to the speaker using 5/8" long 1/4" x 20 pan head or round head machine screws. Use an OmniMount® Series 75 mounting bracket.

S-125 (not S-125C) or S-85

USES OMNIMOUNT® 53-RST

A single 3/8" x 16 threaded insert is located on the back baffle of the cabinet. Use only an OmniMount® 53 RST (special order) bracket.

S125/85/Cman.pm5 rev 3

08/30/96