MK Sound CS-29, CS-35 Custom Modes & Remote Operation CS-150 only, Dipole Mode, Tripole Mode

Page 9

COLUMN SURROUND SPEAKER

You have two sets of mounting locations (4 holes per set). You can use either set of mounting holes on the mounting plate to adjust the location of the speaker depending on the floor covering and the moulding at the base of the wall.

First drill a 1/8" pilot hole to a depth of 1", at a downward angle of 15 degrees. Then use the two # 8 x 1-1/2" Flat Head Wood Screws to attach the Wall Mount Bracket to the baseboard. Angle the screw at a 15 degree angle when fastening the screw through the wall plate. Have a helper hold the speaker securely against the wall while you attach the screws. Note that there is a recess at the bottom of the back baffle of the Column Surround cabinet that forms a channel that can be used for speaker wire routing.

Repeat these instructions to mount the second stand.

If you have further questions about assembling your column Surrounds, please call the M&K factory at (818)

701-7010 or through email at support@mksound.com.

7. CUSTOM MODES & REMOTE OPERATION (CS-150 ONLY)

IMPORTANT: The following options are provided for enthusiasts and installers who wish to experiment with their systems.

The design of the CS-150 Tripole® speaker provides a tremendous amount of flexibility. Because it is designed as if it is two separate speakers (a Direct radiator and a Dipole), you can independently vary the amount of output from either the Direct radiator or the Dipole elements.

By adjusting the ratio of sound produced by these elements, you can fine-tune the speaker to your listening environment or personal preference. You make these adjustments by choosing which input terminals, jumpers, and (if desired) resistors are used to connect the speaker to the amplifier.

PLEASE NOTE: The sensitivity of the speaker is slightly different in each of the surround modes. For critical listening, when switching from one mode to another, you should re-calibrate the level of the surround channels.

Regardless of configuration, the Ground (-) lead from the amplifier must connect to Terminal 2.

a.Dipole Mode

To operate in the Dipole mode, connect the positive (+) lead to Terminal 1. Use no jumper.

b.Tripole® Mode

To operate in the Tripole mode, must connect the positive (+) lead to Terminal 1 and insert the jumper between terminals 3 and 4.

c.Tripole® With Attenuated Dipole Elements

Compared to the standard Tripole® configuration, the output from the Direct (front) drivers will be unchanged, but there will be significantly reduced output from the Dipole (side) drivers.

To attenuate the Dipole elements, connect the positive (+) lead to Terminal 3, and insert the jumper between terminal 3 and 4.

d.Tripole® With Adjustable Attenuated Direct Radiator

Compared to the standard Tripole® configuration, the output from the Dipole (side) drivers will be unchanged, but there will be reduced output from the Direct drivers. This configuration will give you a sound more like the Dipole configuration.

To adjust the attenuation of the Direct Radiator element, connect the positive (+) lead to Terminal 1 and insert a 5 watt resistor between terminals 3 and 4. The resistor can be any value between 2 and 11 ohms. The larger the value of the resistor, the greater the attenuation.

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Tripole column surround speaker Table of Contents Introduction Column Surround SpeakerTripole Surround Concept Speaker HOOK-UP Wiring the Surround SpeakersCS-150 only Left Surround Speaker / Right Surround SpeakerTripole or Dipole Operation CS-150 only Speaker PlacementPosition Relative to Seating CS-150, CS-35, CS-29, CS-22Column Surround Assembly Options Using Multiple Pairs of Surround SpeakersAssembling the Column Surround with the FREE-STANDING Base Mounting the Column Surround to the Baseboard AssemblyTripole Mode Dipole ModeTripole With Adjustable Attenuated Direct Radiator Custom Modes & Remote Operation CS-150 onlyDirect Radiator Only Mode Tripole With Adjustable Attenuated DipoleRemote Switching of Modes CS-150 only Speaker Polarity TestSpeaker Damage & HOW to Avoid IT If YOU Need Service11. M&K TEN Year Warranty Specifications Cabinet Maintenance

CS-150, CS-22, CS-29, CS-35 specifications

MK Sound, a well-respected name in the audio industry, has developed a range of high-performance loudspeakers, including the CS-29, CS-22, CS-150, and CS-35 models. These speakers are designed to deliver premium sound quality and cater to various audio needs, making them suitable for both home theater and professional audio setups.

The MK Sound CS-29 is a compact yet powerful speaker that excels in delivering clear and accurate sound reproduction. Its two-way design features a 5.25-inch woofer and a 1-inch tweeter, allowing for a wide frequency response. The CS-29's innovative cabinet design reduces unwanted resonances, resulting in clean audio playback. Ideal for smaller spaces, it can easily blend in with contemporary décor while providing an impressive audio experience.

Next is the CS-22, which builds on the strengths of the CS-29 but offers a slightly larger profile. Incorporating a 6.5-inch woofer and a 1-inch dome tweeter, the CS-22 excels in producing deeper bass while maintaining clarity in the mids and highs. This model is perfect for those wanting a more robust soundstage without sacrificing detail. Its versatility allows it to function well as either a standalone speaker or as part of a larger home theater system.

The MK Sound CS-150 is tailored for those seeking a more powerful audio solution. Equipped with a dual 6.5-inch woofer configuration and a 1-inch tweeter, the CS-150 delivers remarkable sound pressure levels and dynamic range. This speaker is specifically designed for larger rooms and can handle high volumes without distortion. Its advanced crossover networks ensure a smooth transition between drivers, achieving cohesive sound reproduction across the frequency spectrum.

Finally, the CS-35 stands out as a versatile floorstanding model. It features a sleek design with a pair of 8-inch woofers and a 1-inch tweeter, making it capable of producing deep bass response coupled with the clarity needed for vocal performances and orchestral music. The CS-35 incorporates sophisticated engineering, with a focus on minimizing coloration and enhancing overall soundstage depth.

All of these models utilize MK Sound’s proprietary technologies, including advanced driver materials and optimized cabinet designs, which ensure longevity and minimal distortion. With options ranging from compact to full-sized solutions, MK Sound’s CS series offers a variety of choices to meet the demands of audiophiles and casual listeners alike. Each model emphasizes accuracy, durability, and performance, making them valuable additions to any audio setup.
Top Page Image Contents