Speaker Calibration, Subwoofer Calibration

Bass Management Controller

13.SPEAKER CALIBRATION

1.Your speakers should now be in their final positions.

2.Remove all EQ and signal processing from the monitor path.

3.Turn all volume controls in the signal chain to their “reference level” position. These volume controls include the console main monitor pot, submaster faders and power amplifier volume pots. The “reference level” position is your defined reference playback level, which is typically 85dB SPL for film, video and music. For the purposes of this discussion, we will assume that 85dB SPL is your reference level. If you use a different reference level, then substitute the level that you use whenever you see 85dB SPL.

4.Transfer one channel only (left or right) of the M&K Professional test CD onto your audio storage medium (Pro Tools, open reel recorder, etc.). It is important that the tones be played back from your source through the normal routing of your console or Pro Tools system so that the system calibration is conducted through the same signal path that your audio goes through.

5.Select track three on the test CD and use the 1kHz tone to level-set your console for 0VU on an analog console, or –18 FSD if working digitally. Do not move the faders once you have level-set your monitor path.

6.Select track one on the test CD and route it to the speaker that you want to calibrate (for example: left front).

7.Set your SPL meter for C weighting (flat) and slow (average) response. Set the scale to 80dB. Hold the meter at about a 45 degree angle to vertical and at arm’s length to avoid a false reading from sound bouncing off your body and into the microphone. Point the meter at the center speaker at about ear height. Play track one of the test CD through the selected speaker and read the SPL. Adjust the level to 85dB using a small screw driver on the trim pot on the selected channel of the LFE-4.

8.Do the same for all front (or main) speakers and point the meter at each speaker in turn. The meter’s microphone is directional.

9.Do the same for the surround speakers (Note: the film community prefers to use 82dB as the reference level for surround speakers while DVD authors, broadcasters and music mixers prefer to set all their speakers, including the surrounds, to the 85dB standard.)

(NOTE 1: If you are using a Martinsound MultiMax, connect the LFE-4 to the output of the MultiMax and disengage the Cinema low-end reinforcement program on the MultiMax as this program is not a bass management system.)

(NOTE 2: If your speakers are moved, it is recommended that the whole system be re-calibrated.)

14.SUBWOOFER CALIBRATION

1.Set your SPL meter for C weighting and slow response. Set the scale to 80dB. Point the meter at the center speaker at ear height with the meter at a slightly up-turned angle. Play track two of the test CD through the selected speaker and read the SPL (Remember that the LFE-4 will re-route all frequencies below 80 Hz to the subwoofer.) Adjust the subwoofer level using a small screw driver to 85dB on the subwoofer trim pot on the LFE-4.

2.Next, route track two on the TEST CD to each of the 5 channels. Make sure that the subwoofer level is exactly 85dB SPL for all channels. If they are not, you may have a frequency response problem in the signal path that will have to be corrected before proper calibration can be achieved.

LFE-4 specifications

The MK Sound LFE-4 is a highly regarded low-frequency effects (LFE) speaker, designed to deliver exceptional bass response in home theater and professional audio environments. Renowned for its compact design and powerful performance, the LFE-4 is perfect for audiophiles and filmmakers looking for depth and clarity in the sound experience.

One of the standout features of the LFE-4 is its advanced driver technology. The subwoofer is equipped with a high-excursion 10-inch driver that ensures a robust low-end performance, capable of reproducing deep bass frequencies with precision and impact. This driver is housed in a sturdy cabinet that is engineered to minimize distortion and resonance, thus providing cleaner sound reproduction.

The LFE-4 also incorporates an efficient built-in amplifier, delivering ample power for both dynamic peaks and sustained low-frequency notes. With an output power of up to 300 watts RMS, the LFE-4 can handle even the most demanding cinematic soundtracks, ensuring that every explosion, rumble, and musical note is felt as much as it is heard. This makes it an ideal choice for home theater setups or studio environments where impactful sound is a priority.

In terms of connectivity, the MK Sound LFE-4 offers various options to accommodate different setups. It features both balanced XLR and unbalanced RCA inputs, allowing easy integration with various AV receivers, processors, and professional sound systems. This versatility in connectivity options makes it adaptable for different environments, whether it’s a home theater or a commercial installation.

Additionally, the LFE-4 is equipped with adjustable crossover settings, enabling users to fine-tune the subwoofer's performance to match their specific speaker configuration. This ensures seamless integration with other speakers in the system, creating a cohesive audio experience that enhances the overall soundstage.

The MK Sound LFE-4 is also designed with aesthetics in mind. Its sleek, understated appearance allows it to blend seamlessly into any decor while maintaining a professional look that signifies quality.

Overall, the MK Sound LFE-4 stands out in the market for its solid performance, versatile features, and commitment to delivering an immersive audio experience. Whether it's for music, movies, or gaming, the LFE-4 ensures that bass is not just heard but truly experienced.