Radio Shack RacioShack Bilingual Learning Laptop Using your learning laptop, Select your settings

The Basics

setting up your learning laptop

using an ac/dc adapter

The Basics

using your learning laptop

To power your laptop from a standard AC outlet or vehicle battery power, you need an AC-DC adapter and size M Adaptaplug™ (not supplied, available at RadioShack).

1.Set the voltage switch on the adapter to 6V.

2.Attach the Adaptaplug™ to the adapter’s cord with the switch set to positive.

3.Insert the adapter’s barrel plug into the laptop’s DC 6V jack. Plug the other end of the adapter into the power source.

Arrow

Keys

OFF

Play

Shift

Repeat

Clear

ON/Mode

ENTER

Settings

Help/

Save

Draw/

Move

Backspace/

Erase

		Barrel
Voltage	DC 6V	Plug
	Jack	Adapter
Switch
		Cord

caution

•Use a (Class 2 for AC) power source that supplies 6V DC and delivers at least 300 mA. Its center tip must be set to positive and its plug must fit the laptop’s DC 6V jack.

•Using an adapter that does not meet these specifications could damage the laptop or the adapter.

•Do not leave the laptop plugged in when you are not using it.

turning the laptop on and off

1.Press ON/Mode to turn on the laptop.

2.Press OFF to turn off the laptop.

If you do not press any key for about three minutes, NOTE the laptop says “Bye-bye, come back soon,” and

turns off automatically to save power. To turn it back on, press ON/Mode.

select your settings

Press Settings (the key with a tool on it) and a screen will appear. Move the cursor either by keypad or mouse to select an option. Press ENTER to select.

8 9