Radio Shack Surge Protector owner manual 1706+06* 5742416%614, 100%6+105

9/1WVNGV"#RRNKCPEG"5WTIG"5VTKR

61-2403 OWNER’S MANUAL — Please read before using this equipment.

%106'065

Mounting the Surge Protector	1
Connections	1
Operation	2
Using the Safety Slide Cover	2

Thank you for purchasing the RadioShack 7-Outlet Appliance Surge Strip. This strip protects your valuable appliances from damage caused by sudden electrical spikes and power surges up to 788 joules. The surge strip also ensures steady performance of connected devices by filtering electromagnetic and radio frequency interference..

Using the Indication Tags	2
Troubleshooting	2
Care	2
Service and Repair	2
Specifications	3

#"+/2146#06"#

If an icon appears at the end of a paragraph, go to the box on that page with the corresponding icon for pertinent information.

Rý— Warning	# — Important
. — Caution	± — Note

Swift Detection and Protection — Detects and protects against a power surge of up to 6,000 volts and 42,500 amps in 1 nanosecond (1 billionth of a second).

RESET — See	Power ON Indicator —
“Troubleshooting” on	Lights when the power is
Page 2.	turned on.

Indication Tags — Identify which device’s power cord is connected to which AC socket, so you can avoid disconnecting the wrong device.

AC Adapter Spacing — Lets you plug an AC adapter into your surge protector.

."%#76+10".

•This product is intended for indoor use only.

•This surge protector is not a lightning arrestor and might not protect against lightning-induced voltage surges.

•Be sure the total wattage of all connected devices does not exceed 1,875 watts.

•Use the surge protector only with a three- prong standard AC plug. The surge protector cannot provide protection without a grounded AC source.

POWER — Press to turn the surge protector on. Safety ON

Safety OFF

PROTECTED WHEN LIT Indicator — Lights	Safety Slide Covers — Prevent children
when the connected devices are protected.	from inserting metal objects into the
	unused AC socket(s).

Power Shutdown Protection — Protects the connected appliances from being damaged by shutting down power when surge protection is depleted (see “Troubleshooting” on Page 2).

#"+/2146#06"#

Operating this surge protector from a non- grounded outlet will invalidate your “Connected Equipment Guarantee” and puts your valuable equipment at risk.

R"9#40+0)ýR"

Do not use the surge protector with an aquarium or near wet locations.

±"016'"±"

•Use appropriate mounting anchors if you are mounting the surge protector to drywall.

•The appropriate screw size is shown on the mounting template.

/1706+0)"6*'" 574)'"2416'%614

You can place the surge protector on a level surface or mount it on a wall. Select a location that is:

•near a grounded AC outlet.#

•out of the way of normal activities.R

1.Use the supplied mounting template to mark the holes on the selected location.

2.Drive in two wood screws (not supplied)

with heads that fit into the keyhole slots on the bottom of the surge protector. ±

3.Align the surge protector’s keyhole slots with the wood screws, then press the surge protector down to secure it.

%100'%6+105

1.Connect your electronic equipment’s grounded AC cord plug(s) to the surge protector’s AC sockets. The adapter socket is separated by a wider space so you can connect your electronic device’s AC adapter.

2.Plug the surge protector’s AC power cord into a three-prong standard grounded AC outlet.

© 2002 RadioShack Corporation.

All Rights Reserved.

RadioShack and RadioShack.com are trademarks

used by RadioShack Corporation.