below that range, the highest or lowest temperature flashes.
To change the display language, see “Manually Setting the Time, Date, and Language” on Page 2.
To display either the seconds or the day of the week, press CLOCK.
To view the time in another time zone, press ZONE until the desired time zone is highlighted.
%*'%-+0)"6*'"5+)0#."56#675
The clock displays these symbols to indicate the current or last status of radio signal reception.
5[ODQN | &GUETKRVKQP |
|
|
| The clock received a radio signal |
5.Repeat Steps 3 and 4 to set the minutes, year, month, date, and language.
6.Press CLOCK to store your setting. Then repeatedly press CLOCK to select the weekday or second display.
4'5'66+0)"6*'"%.1%-
Press RESET on the back of the clock with a pointed object such as a straightened paper clip to reset the clock. All display segments briefly appear, then the clock scans for a radio signal.
75+0)"6*'" 241,'%6+10".+)*6
You can use the clock’s projection light to project the time on a wall or ceiling.
ProjectionRESET
5'66+0)"6*'"#.#4/"6+/'
Note: If you do not press a button for about 30 seconds, the clock exits the alarm setup mode. Start over at Step 1.
1. Hold down ALARM until the alarm hour |
flashes. é (alarm on) and û (alarm |
time) appear. |
øý | strong enough to set the date and time |
| within the last 72 hours. |
Light
IMAGE
Battery
2. Repeatedly press or hold down 8 or |
| The clock has not received a radio | |
| signal strong enough to set the date | |
| and time within the last 72 hours. | |
öý | Reposition the clock before the | |
| designated signal check time, or set | |
| the date and time manually. | |
| Or, the displayed time has been | |
| manually set. | |
No | Automatic time setting is turned off. | |
Hold down 8 until ÷ appears, or | ||
Indicator | ||
| reset the clock. | |
| The clock is receiving the radio signal | |
- and the time/date sets shortly. | ||
ùý | The clock is receiving a signal, but | |
reception is not strong enough to set | ||
| the clock. | |
/#07#..;"5'66+0)"6*'"
6+/'."'."#0&".#0)7#)'
Important: A strong radio signal overrides the manual setting. If you do not want this to happen, hold down ZONE until the time icon disappears to turn off the automatic time setting. To turn the automatic time setting back on, hold down 8 for about 2 seconds until ÷ appears, or reset the clock.
Note: If you do not press a button for about 1 minute, the clock returns to the currently set time display.
1.Repeatedly press ZONE to select the desired time zone.
2.Hold down CLOCK until the hour digits flash.
3.Repeatedly press (or hold down) 8 or 9 to select the desired hour setting. 7C or FC appears.
4.Press CLOCK. The minutes digits flash.
Compartment
ROTATION
Cover
FOCUS | DC 3V |
Adapter | |
| Cord Slot |
180° | PROJECTION |
ROTATION | LIGHT ON |
To project the time, place the clock at least 18 inches from the desired surface and adjust the projection arm to the desired angle. Then slide PROJECTION LIGHT ON on the back of the clock in the direction of the arrow to turn on the light.
Caution: The projection arm moves about 90 degrees in either direction. Do not force it further.
Note:only operates when the clock is connected to AC power.
To focus the image, adjust FOCUS on the side of the projection arm.
To rotate the image, turn IMAGE ROTATION on the back of the clock.
To flip the image 180° , press 180° ROTATION .
| 9 to select the alarm hour. |
3. | Press ALARM. The alarm minutes flash. |
4. | Repeatedly press or hold down 8 or |
| 9 to select the alarm minutes. |
5. | Press ALARM to store the alarm setting. |
| The alarm time remains on the display. |
To view the alarm display at any time, press ALARM. To return to the calendar display, press CLOCK.
6740+0)"6*'"#.#4/"101 1((
1.Press ALARM to turn on the alarm. éý appears.
At the preset alarm time, é flashes on the display and the alarm beeps softly every 2 seconds.
If you do not silence the alarm, after 20 seconds, two quick beeps sound every 2 seconds and the alarm volume increases. After 20 more seconds, three quick beeps sound every 2 seconds and the volume increases to its maximum level. After another 20 seconds, the alarm beeps continuously (about four beeps per second) for about 1 minute.
After 2 minutes, the alarm turns off automatically. The first time this
happens, the snooze feature activates and é continues flashing. In about 8 minutes, the alarm sounds again. If the
alarm turns off automatically a second time, é remains on the display and the alarm sounds again the next day at the set alarm time.
2