124#6+10, 6417$.5*116+0 | Radio Shack 61-2402 instruction

8/1WVNGV"#RRNKCPEG"9CNN"6CR"5WTIG"2TQVGEVQT

61-2402	OWNER’S MANUAL — Please read before using this equipment.

#"+/2146#06"#

If an icon appears at the end of a paragraph, go to the box on that page with the corresponding icon for pertinent information.

Rý— Warning	# — Important
. — Caution

Thank you for purchasing a RadioShack 6-Outlet Appliance Wall Tap Surge Protector. Your surge protector protects your valuable electronic devices from damage caused by sudden electrical spikes and surges. It absorbs electrical spikes and power surges and ensures reliable performance of connected devices by filtering electromagnetic and radio frequency interference. Rý .""

R"9#40+0)ýR"

Do not use the surge protector with an aquarium or near wet locations.

."%#76+10".

• This product is intended for indoor use only.

• This surge protector is not a lightning

arrestor and might not protect against

lightning-induced voltage surges.

• Be sure the total wattage of all connected

devices does not exceed 1875 watts.

• Use the surge protector only with a three-

prong standard AC plug. The surge

Power Shutdown Protection —

Protects the connected devices from being damaged by shutting down power when surge protection is depleted.

Safety On

Safety Off

Safety Design Slide Covers —

Prevents children from inserting metal objects into the unused AC socket(s).

PROTECTED WHEN LIT

Indicator — Lights green when the connected devices are protected.

Indication Tags — Lets you place the supplied pairs of tags next to a socket and on the device’s power cord to identify the devices which are connected to each AC socket so you can avoid disconnecting the wrong device.

Swift Detection and Protection —

Detects and protects against a power surge of up to 6,000 volts and 42,500 amps within 1 nanosecond (1 billionth of a second).

protector cannot provide protection without

a grounded AC source.

• Retain Instructions — Retain the safety

and operating instructions for future

reference.

• Damage — Unplug the surge protector from

the wall outlet and replace it:

a. When the power cord or plug is damaged.

b. If liquid has been spilled or objects have

fallen into the surge protector.

c. If the surge protector has been exposed

to rain or water.

d. If the surge protector has been dropped

or damaged in any way.

e. When the PROTECTED WHEN LIT

indicator goes out.

#"+/2146#06"#

Operating this surge protector from a non- grounded outlet will invalidate your “Connected Equipment Guarantee”, and put your valuable equipment at risk.

12'4#6+10

1.Plug the surge protector into a three- prong standard AC outlet. The

PROTECTED WHEN LIT indicator lights. #

2.Plug the device(s) you want to protect into the AC socket(s). The connected devices are protected.

If the PROTECTED WHEN LIT indicator does not light, see “Troubleshooting”.

75+0)"6*'"5#('6;"5.+&'" %18'4

Your surge protector is equipped with a safety slide cover on each of its six AC sockets. Slide up the cover to cover the unused AC socket(s). Slide them down when you’re ready to use the sockets.

75+0)"6*'"+0&+%#6+10"6#)5

Your surge protector is supplied with pairs of indication tags to identify which device’s power cords are connected to which AC socket. Stick a large color tag on the power cord near the base of the device and the same color small tag next to the surge protector’s target AC socket.

6417$.'5*116+0)

Condition

The PROTECTED WHEN LIT indicator does not light.

Solution

The surge protector's AC line is no longer protected from surges; replace the surge protector. The surge protector may have received a power surge or spike beyond its specified limits that might overload the protection circuitry and make it inactive. If this happened, the surge protector should have absorbed enough of the surge to protect the connected equipment, but it will not protect against future surges and spikes.

RadioShack and RadioShack.com are trademarks

used by RadioShack Corporation.