Connections, FCC Information, Specifications

CONNECTIONS

1.Turn off power to the equipment you plan to connect.

2.Set On/Off on the surge protector to Off.

3.Connect the coaxial cable from a satellite dish or antenna to the surge protector’s coaxial Satellite In or Antenna In jack. Then use an F-connector coaxial jumper cable (not supplied) to connect the surge pro- tector’s matching Satellite Out or Antenna Out jack to the receiver’s input jack.

Note: For the best connections, use cables with screw-on F-connectors.

4.Connect a modular telephone cord (not supplied) from the surge protector’s modular Telephone In jack to a standard telephone wall jack. Then connect the surge protector’s modular Telephone Out jack to the IRD (integrated receiver decoder) box.

5.Plug the AC power cords from your television, IRD, VCR, and stereo into the surge protector’s AC outlets. Then plug the surge protector into a standard AC out- let.

Note: You can plug other equipment into accessory outlets on your audio/video equipment, but this affects the total combined wattage.

6.When all connections are complete, set On/Off on the surge protector to On. The green Protected When Lit Power Ring lights.

7.Turn on each piece of connected equipment and con- firm that it operates properly.

FCC INFORMATION

This surge protector has been tested and found to comply with all applicable UL and FCC standards.

We have designed your surge protector to conform to federal regulations, and you can connect it to most tele- phone lines. However, each device that you connect to the telephone line draws power from the telephone line. We refer to this power draw as the device’s ringer equiva- lency number, or REN. The REN is shown on the bottom of your surge protector.

If you use more than one telephone or other device on the line, add up all of the RENs. If the total is more than five (three in rural areas), your telephones might not ring. If ringer operation is impaired, remove a device from the line.

Your surge protector complies with Part 68 of FCC Rules. You must, upon request, provide the FCC registration number and the REN to your telephone company. Both numbers are shown on the bottom of your surge protec- tor.

Note: You must not connect your surge protector to:

•coin-operated systems

•party-line systems

•most electronic key telephone systems

SPECIFICATIONS

Line Voltage	120 VAC
Line Current	15	A
Maximum Wattage	1,800 W
Frequency	60 Hz
Operating Environment	–40°to 158°F
Humidity	0–99%
Noncondensing Cord Length	7 ft.
Circuit Breaker	15	A
Maximum Surge Voltage	6,000	V
Maximum Surge Current	61,000	A
(AC Line: 41,000 A, Coax Line 1: 20,000 A)
Maximum Energy Dissipation	1,080 J
(AC Line: 740 J, Coax Line 1: 340 J)
Modes of Surge Protection	H-N, H-G, N-G
Clamping Response Time	1 Nanosecond
Indicators/Alarms .... Green “Protected” and “Grounded”
Power Ring, Protection Failure Alarm
UL 1449 Rating	330	V
Noise Frequency Range	100 KHz–100 MHz
Noise Attenuation Level	Up to 35 dB
Modes of Noise Rejection	Differential
Coax Protection	Tip-Ground, Ring-Ground

Specifications are typical; individual units might vary. Specifications are subject to change and improvement without notice.

61-2338 specifications

Radio Shack 61-2338 is a versatile FM stereo receiver that stands as a testament to the brand's legacy in consumer electronics. Known for its reliability and range of features, the 61-2338 appeals to both casual listeners and serious audiophiles alike.

One of the standout features of the Radio Shack 61-2338 is its compact design, making it an excellent choice for small spaces or for users who are looking to integrate it into a home audio system without taking up too much room. Its lightweight construction allows for easy maneuverability, enabling users to position it as per their convenience.

The 61-2338 is equipped with an AM/FM tuner, which provides impressive reception clarity, allowing users to enjoy a wide range of radio stations without significant interference. This is particularly beneficial for users in areas where signal strength may be weaker. Moreover, the unit's analog dial adds a vintage charm that appeals to traditional audio enthusiasts.

Another key characteristic of the Radio Shack 61-2338 is its user-friendly interface. The controls are well laid out and intuitive, making it easy for users to switch between stations, adjust volume levels, and modify tonal settings without any hassle. The inclusion of a headphone jack offers privacy for listening sessions, while the speaker outputs cater to larger setups.

In terms of output power, the 61-2338 delivers a commendable audio experience with well-defined bass and clear highs, making it suitable for various types of music. Whether you enjoy classical tunes, rock, or talk radio, the quality of sound reproduction remains consistent across genres.

The unit also showcases a sturdy build that enhances longevity, essential for users who seek a reliable audio component for their home entertainment systems. With its combination of vintage aesthetic and modern functionalities, the Radio Shack 61-2338 has carved out a niche among collectors and everyday users alike.

Overall, the Radio Shack 61-2338 serves as a great option for anyone looking to enjoy quality sound and ease of use in a compact format. Its blend of features, user-friendly design, and dependable performance makes it an enduring piece of audio equipment that stands out in the world of consumer electronics. Whether you're rediscovering the joy of radio or looking to enhance your listening experience, the 61-2338 promises to deliver.