RCA RP5035, RP5030 user manual Cut, Format Caution! All data inside the memory will be erased

RP5030 EN(A ver.) 7/3/06 4:56 PM Page 19

Advanced Operation

EN

Cut

You can erase unwanted parts from your recording.

1.	Select folder.	A
2.	Select file.	AM
3.	Start playback of	ONE
	the file with the	SP
	unwanted part.
4.	Press ERASE to
	mark the start of	A
	the unwanted part,	AM

“CUT-S” shows on	ONE
display.	SP

5.Press ERASE to

mark the endof the unwanted part, “CUT-E” shows on display.

6.Press ERASE again to confirm cutting (or press STOP to cancel)

7.“WAIT” will show on the display.

8.After the memory rearrangement completed, the unit will go to STOP mode.

Tip:

Cutting, inserting new segments and adding

appendix will only update the recorded time length, without changing recording time and date.

Format (Caution! All data inside the memory will be erased)

You can format the internal memory when needed. (e.g. compatability problem, etc.)

The procedures are as follow:

1.Turn on the unit.

2.Press ERASE, “DELETE” will flash on the display.

3.Press and hold REC for 3 seconds, “FORMAT” will flash on the display.

4.Press and hold ERASE, the completed percentage will show on the display, formatting is in process.

5.After the formatting is completed, the remain time of the selected memory will show on the display.

A		A		A
DICT			DICT	DICT
SP			SP	SP
A		A
DICT			DICT
SP	REMAIN		SP

14