IR Control Installation, Power the system

IR CONTROL INSTALLATION

The following procedure outlines how to set up the BGD2 Power Dock and its adapters for an IR control multiroom audio system.

1. Locate devices

Set the iBridge Power Dock in the room where the iPod will be located. Locate a power outlet near the power dock where the BGDA Dock Adapter will be located.

Place the BGCA Controller Adapter next to the audio controller.

2. Connect BGCA

With the audio system turned oﬀ, connect an RCA stereo audio cable from the BGCA to the desired source input location on the back of the controller.

Note: set the source/function selector on the BGCA to IR for infrared control of the iPod.

3. Power the system

Plug the BGCA Controller Adapter into a live outlet and power on the audio controller. Temporarily plug the BGDA Dock Adapter into a live AC outlet near the BGCA.

4. Bind the system

To bind the two adapter devices, press and release the binding button on the bottom of the BGDA. The binding LED should blink fast for two seconds, then blink slowly for 60 seconds. During this 60-second duration, press and release the binding button on the front of the BGCA. It should instantly bind to the BGDA, and the binding LED on both adapters should be solid on. This sets a unique security key for the two adapters to act as a pair and only communicate with each other.

For systems with more than one Power Dock, perform the complete binding procedure for each set of adapters before moving to the next to ensure proper binding between pairs.

If the system has conﬁgured itself properly, the green binding LEDs on the front of the adapters will illuminate. Once the binding procedure is successfully completed between adapters, the BGDA can then be moved to the Power Dock location.

5. Connect iBridge Power Dock

Crimp an RJ45 connector to each end of a CAT-5 cable using T568A wiring conﬁguration (max cable length is 50 feet). Plug one connector into the RJ45 port on the back of the Power Dock. Plug the other end into the BGDA’s RJ45 port (bottom edge). Plug the BGDA into a live AC outlet near the desired Power Dock location. Make sure the network traﬃc LED is lit to indicate strong communication between adapters.

6. Program audio system

Conﬁgure the audio system for IR control of the iPod.

7. Check iPod operation

With the audio system controller, and both adapters powered, place an iPod in the Power Dock. The "Docked" LED on the BGDA Dock Adapter and BGCA Controller Adapter should both be solid on.

Using a Pronto brand remote control programmed with Russound iPod templates (see www.remotecontrol.com), send a command to the iPod via the multiroom controller IR receiver. The iPod should respond to the command, and the activity LED on the BGDA and BGCA should be on and blink periodically.

8. Reset a previously bound BGDA and/or BGCA

To reset a previously bound BGDA or BGCA, plug in the unit(s). If the binding LED is on, clear the existing binding by pressing and holding both binding buttons until the binding LED goes oﬀ (about 10 seconds). Then proceed to bind the adapters (step #4).

8	Russound BGK3 iBridge Power Dock Kit Installation Manual

BGK3 specifications

The Russound BGK3 is an advanced solution designed for home audio distribution, catering to both residential and commercial applications. Renowned for its impressive features and robust technology, the BGK3 provides users with a versatile platform to enjoy high-quality sound through multiple zones.

One of the main features of the BGK3 is its ability to control audio in up to six different zones. This capability allows users to enjoy different music selections in various rooms without compromising sound quality. Each zone can be independently controlled through various interfaces, giving users the freedom to customize their audio experience based on personal preferences or activities.

The BGK3 utilizes Russound’s innovative technology, which includes digital signal processing and advanced amplifier designs. This technology ensures that the audio output is clear and consistent across all zones. The built-in amplifiers deliver a powerful performance with low distortion, allowing for dynamic range and depth in sound reproduction.

Another significant characteristic of the BGK3 is its compatibility with a wide array of devices. The system supports various audio sources such as satellite radio, streaming services, CD players, and more. Additionally, the BGK3 can be integrated seamlessly with smartphones and tablets, giving users the ability to stream their favorite music directly to the system with ease.

The BGK3 also features user-friendly interfaces, making it accessible for everyone in the household. Its intuitive controls, whether through wall-mounted keypads, mobile applications, or remote controls, enhance user experience by simplifying audio management. The system supports Russound's app, which provides mobile control and offers features such as zone grouping and source selection from anywhere in the home.

Moreover, the BGK3 comes equipped with various connectivity options, including Ethernet, Wi-Fi, and Bluetooth, facilitating seamless integration into modern smart homes. This connectivity allows the BGK3 to interface with home automation systems, enabling users to control their audio alongside other smart home devices for a cohesive experience.

Overall, the Russound BGK3 stands out as a highly advanced audio distribution system, combining versatility, user-friendliness, and high-quality sound. Its multi-zone capabilities, advanced technology, and broad compatibility make it an excellent choice for music lovers seeking an immersive audio experience throughout their spaces.