| Problem |
| Suggested Solution (s) |
|
|
| |
(continued from previ- | 2 | Reduce the distance between the Echo Transmitter and Echo Antenna, or ad- | |
ous page) |
| just the location of one or both units until the signal strength on your SIRIUS | |
|
|
| radio is good and the audio from it is acceptable. Materials used in the con- |
|
|
| struction of your home and/or proximity to other 900 MHz products may have |
|
|
| an adverse effect on the range of the SIRIUS Echo Signal Repeater System. |
SIRIUS radio displays, | 1 | Verify that the SIRIUS home antenna cable is connected to the Echo Transmit- | |
“Acquiring Signal” |
| ter. | |
|
| 2 | Verify that the AC Adapter is plugged into a working 110 volt AC outlet and is |
|
|
| connected to the Echo Transmitter. |
|
| 3 | Verify that all three green LEDs on the Echo Transmitter and the single green |
|
|
| LED on the Echo Antenna are lit. |
|
| 4 | Check the Antenna Aiming/Signal Strength display on your SIRIUS radio to |
|
|
| verify that you have at least six bars of SAT or TER signal. (See previous sug- |
|
|
| gested solution.) |
SIRIUS radio displays | 1 | Verify that the cable from the Echo Antenna is connected to the SIRIUS radio | |
“Antenna Not Detected” |
| and that the single green LED on the Echo Antenna is lit. | |
|
|
|
|
20 |
|
|
|
© Directed Electronics, all rights reserved.