Gamber Johnson 7160-0264-02 25-20 x .75 Hhcs 4X .281 Q Holes, CF19 Accessories, Work Table Wedge

Page 6

CF19 Accessories

	Screen Support
7160-0049: CF19 Screen Support	#8-32 X .38 Screws
	and Flat Washers

Use two #8-32 x .38 long socket head screws and two #8 flat washers to attach the screen support to the back side of the CF19 Dock as shown.

7160-0073: Work Table Wedge

The CF19 work table wedge has rubber pads to provide a mobile slip free mounting surface. Four .281 square holes on the bottom surface allow mounting the work table wedge permanently to a surface if required. See drawing for mounting hole location.

.25-20 x .75 HHCS

4X .281 Q Holes
	.31
	7.19
9.41	.51
(Mounting Hole Location)

6 0F 7

Image 6

Contents Installation Instructions Antenna Antenna Connector Connector RJ45 External Connection USB Port Serial Video ConnectionInstallation of the Power Jack Installing CF19 Computer into the DockRemovefig Strap Ring attached away from Front Retainer ReLocating Computer Carrying StrapCable Ties 25-20 x .75 Carriage BoltFlat Washers Nuts Vehicle Mounted Docks7160-0049 CF19 Screen Support CF19 Accessories25-20 x .75 Hhcs 4X .281 Q Holes Work Table WedgeLED Assembly Activation Button #6-32 x .38 Screws LED Assembly