Audiovox VDS102T operation manual Controls Function Descriptions, Three position Dome Light Switch

Controls Function Descriptions

1.Infrared Sensor – Allows the remote control to operate the VDS102T and to control the DT102 when docked.

2.Three position Dome Light Switch

•Auto – Automatically switches on the dome lights in conjunction with the vehicle’s interior illumination.

•Off – The dome lights will not turn on in this position.

•On – Turns on the dome lights.

3.Dome Lights – Provide additional interior illumination.

4.Channel (5) Button – Used this button to increase the channel number to the desired number.

5.Channel (6) Button – Used this button to decrease the channel number to the desired number.

6.Auto Program Button – Allows the user to scan and store active TV stations into memory.

7.Screen Release – Moves in the direction of the arrow to release the drop down screen.

8.Shuttle Shut-off Switch – Turns off the DT102 when closed.

9.Security Lock Knob – Used to ensure that the shuttle is not released accidentally.

10.24 Pin Signal Interface Connector – Used to connect the shuttle to the docking station.

11.Shuttle Release – Press to release the shuttle from the docking station.

12.POWER Button – Used to turn the system ON/OFF. Bright red when system is on, dim when off.

13.FMM Select Button – When this button is pressed it will turn on the wireless FM Modulator and then cycle through the available FM frequencies (FM Off, Channel 1, 88.3MHz; Channel 2, 88.7MHz; Channel 3, 89.1MHz; Channel 4, 89.5MHz; Channel 5, 89.9MHz).

14.Source Select Button – Used to select one of the three sources (DVD, AV1, TV)

6