MK Sound K-5, K-17 K 5.1 Multichannel System Setup Guide, Most Important Items In System Setup

Page 11

K-SERIES SATELLITE SPEAKER

9. M&K 5.1 MULTICHANNEL SYSTEM SETUP GUIDE

The 5 Most Important Items In System Setup:

Find the best location for the subwoofer for maximum output and flattest

response (usually the corner closest to the listening position)

Aim the front speakers (and the surrounds, if possible)

for the flattest response and best imaging

Set all speakers to the Small setting for proper High-Pass and Low-Pass Filter

operation to get the lowest distortion and maximum dynamic range

Calibrate all speakers and the subwoofer to the identical

level for proper imaging and balance

Make sure all speakers are in phase for proper imaging and impact

These instructions will help you make sure that you cover all steps in setting up a 5.1 multichannel surround sound system. In addition to following this list, make certain that you study and understand the owner’s manual for each and every component used in the system, especially the processor/receiver’s manual. Have fun and good luck!

A useful tool for system setup is the DVD called Video Essentials. If you don’t have one, you can order it by visit ing the web site at www.videoessentials.com.

Here are the instructions for speaker setup.

1.Locate the front speakers. The left, right, and center speakers should be equidistant from the main listening position. Try to set up the speakers so that they are reasonably symmetrical to room surfaces. A tape measure may be very helpful.

2.Locate the subwoofer.

A.The best place for the subwoofer is the corner with the best structural strength. If the corners are roughly equal in construction, use the corner nearest the listening position. If the listening position is in the front half of the room, place the subwoofer in a front corner. If it is in the back of the room, place the subwoofer in a back corner. If possible, avoid corners near doorways or openings.

B.If you are willing to experiment, another option is to place the subwoofer at the listening position and walk around the room. Stand in and near each corner. The location where you hear the tightest bass with the most impact is probably the best location in the room for the subwoofer.

C.If multiple subwoofers are used, place them in the same location. Stacking is best, but you can also put them side by side.

Another option for multiple subwoofers is to place them in different locations. This is appropriate when you have limited choices in locating the subwoofer and none of the available locations work well. Try to place multiple subwoofers at equal distances from the listening position to avoid phase cancellation.

3.Locate the surrounds. Determine the best position in the room. It will probably be the position used for THX speaker, directly to the right and left of the main listening position on the side walls (so that a listener in the center seat is directly between the speakers). If that doesn’t work or is not practical because of the room, try these locations: on the ceiling; on the back wall, or in the back corners.

4.Install all wiring and interconnects.

5.Connect the subwoofer. Always use the processor/receiver’s subwoofer output.

6.Make sure that you aim the left and right speakers in both the horizontal and vertical planes. Horizontal toe-in helps to get the best possible imaging.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Satellite speaker Table of Contents Introduction Placement of Your SpeakersUsing the Flush Mount Hanger Brackets Rear Front Speaker HOOK-UPHeight or Angle Optimizing Speaker PlacementHookup Separation Between Left and Right Speakers Location Away from Reflecting SurfacesCenter Channel Home Theatre UsageLEVEL-MATCHING TIMBRE-MATCHINGSurround Channels Subwoofer SATELLITE/SUBWOOFER Phasing TestSpeaker Damage & HOW to Avoid IT 5 Most Important Items In System Setup K 5.1 Multichannel System Setup GuideSeries Satellite Speaker Cabinet Maintenance If YOU Need Service or SET-UP Assistance11. M&K 10 Year Warranty 17/K-7 SpecificationsWall Mounting Bracket Template and Instructions Level Template to this Line Wall Mounting Bracket Template and Instructions

K-5, K-15 K-7, K-17 specifications

MK Sound, a prominent name in the audio industry, has established a reputation for delivering high-performance home theater and audio solutions. Among their noteworthy offerings are the K-5, K-15, K-7, and K-17 speakers, each designed to elevate the listening experience with cutting-edge technology and impeccable sound quality.

The K-5 is a compact floor-standing speaker that excels in both music and home theater applications. Featuring a 5.25-inch woofer, the K-5 produces deep bass while maintaining clarity in mid and high frequencies. Its advanced crossover design ensures a seamless transition between drivers, resulting in a cohesive soundstage. The K-5 also employs MK Sound's patented technology, which minimizes distortion and enhances dynamic range, allowing listeners to experience music and films with extraordinary detail.

The K-15 speaker is engineered for those who crave a powerful audio performance without sacrificing space. It boasts a 6.5-inch woofer and a specially designed tweeter that deliver rich, full-bodied sound. The K-15’s cabinet is constructed from high-quality materials to reduce resonance, thereby enhancing audio clarity. Additionally, it features adjustable ports for customizable bass response, catering to different room acoustics and listener preferences.

For audiophiles looking for a more substantial option, the K-7 stands out with its dual 7-inch woofers. This speaker is designed to create a robust sound stage suitable for larger rooms. The K-7 utilizes MK Sound’s advanced phase coherence technology, which aligns the output of the drivers to ensure that sound reaches the listener's ears simultaneously. This results in an incredibly immersive listening experience, whether enjoying music or watching an action-packed film.

Finally, the K-17 speaker combines aesthetic appeal with high-performance acoustics. Featuring innovative driver technology, including a unique tweeter design, the K-17 offers exceptional high-frequency response and detail. Its sophisticated cabinet design helps to control resonance and enhance sound quality, making it an ideal choice for discerning listeners. The K-17 is also equipped with flexible mounting options, making it suitable for various setups in home theaters or music rooms.

In conclusion, MK Sound's K-5, K-15, K-7, and K-17 speakers offer a range of features and technologies tailored for different listening environments. With a commitment to quality and performance, these models exemplify MK Sound's dedication to providing an unparalleled audio experience for all music and movie enthusiasts.
Top Page Image Contents