Toshiba MK6022GAX user manual Installation Notes, Placing Hard Drive inside your Computer

Page 5

Installation Notes

ƒThe drive should be mounted carefully on the surface of 0.1mm or less flatness to avoid excessive distortion.

ƒIn order to prevent short-circuit under any circumstances, a space of 0.5mm or more should be kept under the PCB.

ƒSpace should be kept around the drive to avoid any contact with other parts, which may occur due to shock or vibration.

ƒThe temperature of the top cover and the base must always be kept under 60C to maintain the required reliability.

ƒBe sure not to cover the breathing hole to keep the pressure inside the drive at a certain level

ƒDo not apply any force to the top cover, except the screw areas on top cover. Maximum force to the specified area is 2N.

ƒThe drive contains several parts which may be easily damaged by ESD (Electric Static Discharge). Avoid touching the interface connector pins and the surface of PCB. Be sure to use ESD proof wrist strap when handling drive.

ƒThe four mounting screws should be tightened equally with 0.3N-m (3kgf-cm) torque. The depth should be 3.0mm minimum and 3.5mm maximum.

Placing Hard Drive inside your Computer

Determine mounting configuration (the drive can be mounted in either a horizontal or vertical orientation)

Configure drive for system application.

Configure the adapter board for the specific system application (if required).

Install adapter board into an unused PC/AT 16 bit slot (if required).

Install the I/F cable to the system's 44 pin connector port or adapter board. Ensure pin 1 is oriented correctly, (pin 1 on the cable is usually identified by a red or blue strip.)

Set correct drive type in system CMOS

Refer to applicable manuals for software installation instructions.

Important Note: Disconnect power from your computer system before beginning installation.

Figure 2.HDD Mounting Holes

3

Image 5
Contents Inch Hard Disk Drive Contents Introduction MK6022GAX HDD2184 General FeaturesMaster/Slave Settings Setup MK6022GAX HDD2184Placing Hard Drive inside your Computer Installation NotesBacking up Data Files Using the Hard Disk Drive MK6022GAX HDD2184Problem Solution Troubleshooting MK6022GAX HDD2184Specifications -MK6022GAX HDD2184 Regulatory PhysicalRecommended Cable Characteristics Drive Connectors -MK6022GAX HDD2184Interface Connector Drive Interface Signals
Related manuals
Manual 11 pages 28.21 Kb

MK6022GAX specifications

The Toshiba MK6022GAX is a high-performance hard disk drive (HDD) that was designed to cater to the growing storage needs of consumers and businesses alike. With a storage capacity of 60 gigabytes, this drive provides a reliable solution for various applications, including desktops, laptops, and even embedded systems.

One of the standout features of the MK6022GAX is its compact dimensions and lightweight design. The drive is designed to fit seamlessly into portable devices, making it ideal for users who require mobility without sacrificing storage capacity. The small form factor ensures that it can be integrated into slim laptops or space-constrained environments, providing flexibility in system design.

In terms of performance, the MK6022GAX boasts a spindle speed of 4,200 revolutions per minute (RPM), which, while not the fastest in the market, provides a balanced mix of performance and energy efficiency. The drive utilizes a 2.5-inch form factor, which is standard for many laptops and portable devices, ensuring compatibility across a wide range of applications.

The MK6022GAX incorporates advanced technologies that enhance its reliability and data integrity. With an average seek time of 12 milliseconds, the drive offers decent data access speeds that cater to everyday computing needs. The use of Toshiba’s innovative head position control technology helps to reduce errors and increase the precision of data retrieval, making it a solid choice for users who value data security.

Another notable characteristic of this HDD is its power consumption. With an energy-efficient design, the drive operates at lower power levels, which is crucial for prolonging battery life in portable devices. This efficiency is particularly beneficial for users who often work on the go, minimizing the need for frequent recharging.

The MK6022GAX also features a buffer memory of 2 megabytes, which aids in caching frequently accessed data for quicker retrieval. This can significantly improve the overall user experience, especially during intensive read and write operations.

Overall, the Toshiba MK6022GAX provides a well-rounded storage solution that combines reliability, efficiency, and decent performance for users across various sectors. Whether for personal use or business applications, this HDD stands out as a solid option in Toshiba's lineup of storage products.