Toshiba TDP-XP1 Lamp replacement, Mount the new lamp, Replace the lamp cover, Reset the lamp time

Page 38

Lamp replacement (Continued)

5 Mount the new lamp.

5

2

Align the orientation, press down the new lamp until the bottom is reached, and lock in place using the two lamp locking screws.

1

6Replace the lamp cover.

Align the cover, and press it in, then tighten the screws loosened in step 3 until the lamp cover is no longer loose. (Be sure to replace the lamp cover.)

7Reset the lamp time.

See the lamp’s manual for instructions on resetting the lamp time.

Notes and Precautions

•The [Lamp time] item in the Status display menu indicates the time of lamp use (as a rough guide). p.35

•It is recommended that the lamp be replaced after 3,000 hours of use.When [Lamp time] reaches 3,000 hours, a message will appear. (After 3,000 hours, the message will appear when the power is first turned on after each 100 hour period of use.) This display disappears when you press the button.

•Attach the lamp cover correctly so that it is not loose. If it is not attached correctly, the projector may fail to be powered on or the lamp may fail to come on.

•Always replace the lamp with a new one.

•The lamp is made out of glass. Do not touch the glass surface with your bare hands, bang it, or scratch it. (Dirt, jolts, scratches and the like could break the lamp.)

Used Lamps

This projector’s lamps contain trace amounts of environmentally harmful inorganic mer- cury. Be careful not to break used lamps, and dispose of them in accordance with local regulations.

38

Page 37 Page 39
Image 38
Page 37 Page 39
Contents TDP-XP1 Data Projector Safety Precautions USA onlyBefore Using Source of Light Important Safety InstructionsPower Sources VentilationHeat CleaningPower Cord Protection Water and MoistureImportant Safety Instructions Servicing AccessoriesDamage Requiring Service Do not use the product in a closed installation loca Tion Replacement PartsSafety Check Place and Manner of Installation Power Supply InformationImportant Precautions Moisture CondensationAvoid Volatile Liquid Important PrecautionsExemption Clauses Disposal Other InformationCopyrights TrademarksRemote Control Battery Contents Page Checking the package contents Names of each part on the main unit Names of each part on the control panel Control panelNames of each part on the remote control Parts on the rear panel Operating the remote control Preparing and using the remote controlLoading a coin cell battery Into the remote control Placement Placement StylesAs seen from above PlacementProjection Distance and Size As seen from the sideConnection Before connectionPress the ON/STANDBY Turning the power on and offTurning the power on ButtonPress the ON/STANDBY button again Turning the power off Press the ON/STANDBY buttonPrecaution Basic operations Turn on the powerSelect the language When using the first time Activate the connected deviceAdjusting the volume with VOL+/- buttons Projector placement angle adjustmentsAdjusting the screen size and focus To adjust the horizontal angle, use Tilt adjusterPress the remote control’s Auto SET button.  Using handy featuresUsing auto setting For computer input only Correcting the keystone distortionCutting off the picture and sound temporarily Mute Press the remote control’s Mute buttonPress the remote control’s Freeze button Freezing the image FreezeTo zoom out, press the remote control’s Resize button Using handy featuresPress the remote control’s Resize button Resizing imageUsing the menus How to use the menusUsing the menus Image adjustment menuBackground Display setting menuDetailed description Screen size Lamp power Default setting menuFan mode Power onDisplaying Information Status display B/P RWhen the lamp is broken About lampLamp replacement Unplug power cord Wait until lamp is sufficiently cooledMount the new lamp Lamp replacementReset the lamp time Replace the lamp coverMain unit cleaning Lens and main unit cleaningLens cleaning Trouble indications No powerPower went out during use Lamp went out during use, or won’t come onBefore calling service personnel Specification SpecificationsList of general specifications Separately sold productList of supported signals RGB signals List of supported signals Video, S-Video signals SpecificationsList of supported signals Component signals Pin assignment of Computer in & Monitor terminalsControl terminal Pin assignmentPage Français Español Deutsch

TDP-XP1 specifications

The Toshiba TDP-XP1 is a lightweight and portable projector that has gained attention for its array of features and capabilities tailored for both professional and educational settings. With a compact design, it is designed for those who need mobility without compromising performance, making it ideal for business presentations, classroom use, and personal applications.

One of the standout characteristics of the TDP-XP1 is its impressive brightness level, rated at 1,200 ANSI lumens. This feature ensures that images appear sharp and clear even in environments with ambient lighting. The native resolution of the projector is SVGA (800x600), which provides good clarity for standard presentations and video content. However, it also supports various resolutions, making it versatile for different content types.

In terms of technology, the Toshiba TDP-XP1 employs a 3LCD technology. This system enhances color accuracy and provides vibrant images, which is crucial for maintaining audience engagement. The projector also incorporates a built-in speaker, delivering decent sound quality for small to medium-sized rooms, thus removing the need for additional audio equipment in casual settings.

Portability is a key selling point for the TDP-XP1. It weighs around 4.4 pounds, and its compact form factor makes it easy to carry in a bag or backpack. The projector features multiple input options, including VGA and composite video ports, allowing users to connect it to a variety of devices such as laptops, DVD players, and gaming consoles effortlessly.

The lamp life of the projector is another highlight, with an estimated lifespan of up to 2,000 hours in normal mode, and longer in eco-mode. This feature not only helps reduce operational costs but also minimizes the frequency of maintenance, making it an economical choice for users.

Additionally, the TDP-XP1 is equipped with various setup features, including digital keystone correction, allowing users to adjust the image for optimal viewing without physical repositioning. Overall, the Toshiba TDP-XP1 projector offers a splendid blend of portability, performance, and convenience, making it a suitable option for a wide range of applications from corporate meetings to classroom lectures.
Top Page Image Contents