Toshiba TDPTW300 Control setting menu, Detailed description Wired LAN, PJLink, Character entry

Using the menus (Continued)

■The control setting menu

This menu sets items regarding wired LAN.

By this setting, you can transmit operation status messages from the projector to the specified E-mail address.

Item	Description
Wired LAN	[ : Wired LAN setting] [	: Select item]

Projector name: Enter a character string (0 to 64 characters) using numeric keys of the remote control.

DHCP: Use Not use

IP address: Enter a character string using numeric keys of the remote control.

Subnet mask: Enter a character string using numeric keys of the remote control.

Gateway: Enter a character string using numeric keys of the remote control.

Confirm: [OK Cancel]

Email [ : E-mail setting] [ : Select item]

Status notification: On Off

SMTP server: Enter a character string using numeric keys of the remote control.

Port number: Enter a character string using numeric keys of the remote control.

Destination address: Enter a character string using numeric keys of the remote control.

Confirm: [OK Cancel]

PJLink [ : PJLink setting] [ : Select item]

PJLink authentication: On Off

Password: Enter a character string (1 to 32 characters) using numeric keys of the remote control.

Confirm: [OK Cancel]

Detailed description [Wired LAN]

<Projector name>: Setting a projector name helps you identify each of the projectors that are connected to the network.

• You cannot set a projector name starting with ERR.

<DHCP>: When <DHCP> is set to [Use], an IP address is automatically assigned to the projector by a DHCP server. In case of a network that an IP address cannot be assigned automatically, set <DHCP> to [Not use].

When <DHCP> is set to [Not use], ask your network administrator for IP address, subnet mask, and gateway, then set the following items manually:

<IP address>: This is a unique number assigned for a terminal to connect to a network. The format is a quartet of 3-digit decimal number. (Example: 111.112.xxx.xxx)

<Subnet mask>: For dividing the network, the subnet mask determines the range

of an IP address assigned to a terminal. (Example: 255.255.xxx.xxx)

<Gateway>: Gateway specifies a network device like a router when accessing a server outside the network. It is identified by an IP address. (Example: 111.112.xxx.xxx)

[Email]

<Status notification>: Sends alarm information to the specified E-mail address when an error such as lamp blowout occurs.

<SMTP server>: Set an IP address of the SMTP server.

<Port number>: Enter a port number of the SMTP server.

<Destination address>: Enter within 60 characters. (Example: xxx@xxx.xxx)

[PJLink]

<PJLink authentication>: Set whether or not to authenticate the user by password when the projector is accessed via the PJLink-compliant Software Application. (Set [On] or [Off].)

<Password>: Enter a password for confirmation when the above <PJLink authentication> is set to [On].

Precautions

•When purchased, <PJLink authentication> is set to [Off] and <Password> is not set by factory setting. You are recommended to make authentication setting as soon as possible.

•If you forget a password, set it again.

Character entry

Enter characters using numeric keys of the remote control.

The character is entered with a beep sound if the beep sound is set to [On].

						Character entry mode
Remote	Items using characters, numbers, and symbols
control								Number only
	(e.g., projector name and destination address)
button
	“1”	“.”	“@”	“-”	“_”			“1”
	“2”	“A”	“B”	“C”	“a”	“b”	“c”	“2”
	“3”	“D”	“E”	“F”	“d”	“e”	“f”	“3”
	“4”	“G”	“H”	“I”	“g”	“h”	“i”	“4”
	“5”	“J”	“K”	“L”	“j”	“k”	“l”	“5”
	“6”	“M”	“N”	“O”	“m”	“n”	“o”	“6”
	“7”	“P”	“Q”	“R”	“S”	“p”	“q” “r” “s”	“7”
	“8”	“T”	“U”	“V”	“t”	“u”	“v”	“8”
	“9”	“W”	“X”	“Y”	“Z” “w” “x” “y” “z”			“9”
	“0” “space!"#$%&'()*+,-./:;<=>?@[＼]^_`{｜}~”							“0”
	Deletes one character.							Deletes one character.

Operations

46 47