Toshiba TDP-SC35, TDP-S35 manual Using the menu, Image adjustment menu, Display setting menu

Using the menu (Continued)

■The image adjustment menu

Use this menu to adjust image-related items.

Items that can be adjusted are marked with “Yes”, and those that cannot are marked with “No”.

Item		Description				Computer	Y/PB/PR	Video	Camera
								S-video
Contrast	Adjust the image contrast.					Yes	Yes	Yes	Yes
	Lower		Higher
Brightness	Adjust the brightness of the image.					Yes	Yes	Yes	Yes
	Darker		Brighter
Color	Adjust the color of the image.					No	Yes	Yes	No
	Lighter		Deeper
Tint *1	Adjust the tint of the image color.					No	No	Yes	No
	Reddish		Greenish
Sharpness	Adjust the sharpness of the image.					No	Yes	Yes	Yes
	Softer		Sharper
Noise	Set the function to reduce screen noise.					No	Yes	Yes	No
reduction	On (Enable)		Off (Disable)
Picture	Press	. Toggle the picture mode with				Yes	Yes	Yes	No
mode	/ .
	Bright/Standard/True color
R-level	Adjust red of the image color.					Yes	Yes	Yes	Yes
	Less red		More red
G-level	Adjust green of the image color.					Yes	Yes	Yes	Yes
	Less green		More green
B-level	Adjust blue of the image color.					Yes	Yes	Yes	Yes
	Less blue		More blue
NTSC mode*1	Set the black level with			/	button.	No	No	Yes	No
	US:	NTSC (US) mode
	Japan: NTSC (JAPAN) mode
Shutter	Set the shutter speed of the camera to					No	No	No	Yes
	the local power frequency.
(TDP-SC35)		50 Hz	60 Hz
White	Set the white balance of the document					No	No	No	Yes
balance*2	camera.
(TDP-SC35)		Auto	Lock

*1: [Tint] and [NTSC mode] can be displayed and adjusted only when the video signal is set to [NTSC] and [NTSC4.43]. (NTSC mode is set to JAPAN when the language is set to Japanese. It is set to US for other languages.)

*2: Even if the white balance is set to [Lock], turning the projector off disables this function and turning it on again the next time resets the menu to [Auto]. (TDP-SC35)

■The display setting menu

Use this menu to set screen display-related items.

Item	Description
Screen size
	(Full): Display with 800 ⋅ 600 dot resolution
	(Thru): Display with sampling resolution (for computer input)
	(Wide): Wide-screen display (for Video, S-video, and Y/PB/PR)
Language	Select one of the languages below to use for displaying the menu and messages
	[ : Enter setting mode] [	:Selection]	[Apply:	]

English/Français/Deutsch/Italiano/Español/Português/ /

Svenska/Türkçe/ / / /

Background Screen to display when there is no input signal (Logo) (Blue) (Black)

Icon	Display icons as function guides	On	Off
Start-up screen Display start-up screen when power is turned on		On	Off

Note

•If “Thru” is selected for screen size, portions exceeding the native resolution (800 ⋅ 600 pixels) will not appear on the screen. Note that for RGB signals with clock frequency 110MHz or lower, all input pixel signals are sampled. However, if the clock speed is higher than this, the RGB pixel signal is thinned before sampling.

Operations

30 31