Using the document camera (Continued)
■Image projection with the document camera
1 Place the document.
Set the document at the top of or the side of the projector.
2Press the CAMERA button, and select camera input.
• The input returns to the previous input when the CAMERA button is pressed again.
•Camera input can also be selected by pressing the remote
control or camera’s INPUT button.
3Rotate the camera lens to align the orientation of the document for shooting.
4Move the camera head up and down to adjust the image size.
Farther: Smaller image
Closer: Larger image
•Closeup shot with the distance shorter than 100 mm cannot be performed.
5Adjust the focus using the focus ring on the camera head
Rotate the focus ring to either NEAR or FAR, whichever is better in focusing.
Turn the focusing ring to adjust the focus.
• Near : 100 mm to 300 mm Far : 300 mm to 5 m
6If the screen is too dark or too bright, use the
CAMERA GAIN
The Sharpness of the camera image can also be adjusted using the Image adjustment menu p.32 .
7After use, turn off the light, and fold up the document camera.
| Fold up the camera using the opposite order from Preparation of the document camera. | Operations |
|
| |
| the document, or image adjustment. | |
| PRECAUTION |
|
• If the room’s fluorescent lighting causes the image to flicker, either turn off the fluorescent |
| |
| light, or set the Shutter speed from the Default menu p.32 . Note that changing the |
|
| Shutter speed setting may not eliminate the flicker, depending on the lighting, state of |
|
|
|
|
Note
•No audio is output when camera input is selected.
36 | 37 |