Toshiba user manual Setup MK1016GAP HDD2152, Master/Slave Settings

Page 4

SETUP – MK1016GAP (HDD2152)

Caution: Your Hard Disk Drive is a precision device and even a small drop onto any surface can cause damage. Electronstatic discharge can also damage the drive. You should ground yourself prior to handling the drive.

Master/Slave Settings

Your Toshiba Hard Disk Drive can be configured as either a "Master" or "Slave" unit. Master configuration is used for all single drive applications, and master or slave configuration (only one of each per port) is used for two drive applications. Use the information in the following table before setting drive as Master or Slave.

Master configuration is obtained by setting jumpers A, B, C & D open (no jumper present). Slave configuration is obtained by setting jumpers C-D. When B-D jumper is installed, the drive is configured as cable select. If pin 28 = Low, the drive is "Master", if pin 28 - High, the drive is "Slave".

Figure 1.HDD Jumper Locations

JUMPER

P28

DRIVE

No Jumper

-

Master Drive

C-D Jumper

-

Slave Drive

B-D Jumper

LOW

Master Drive

B-D Jumper

HIGH

Slave Drive

A-B Jumper

-

Prohibit

A-C Jumper

-

Prohibit

2

Image 4
Contents Inch Hard Disk Drive Contents General Features Introduction MK1016GAP HDD2152Setup MK1016GAP HDD2152 Master/Slave SettingsInstallation Notes Placing Hard Drive inside your ComputerUsing the Hard Disk Drive MK1016GAP HDD2152 Backing up Data FilesTroubleshooting MK1016GAP HDD2152 Problem SolutionSpecifications MK1016GAP HDD2152 Physical RegulatoryInterface Connector Drive Connectors MK1016GAP HDD2152Recommended Cable Characteristics Drive Interface Signals

MK1016GAP specifications

The Toshiba MK1016GAP is a notable addition to the realm of hard disk drives (HDDs), designed primarily for mobile applications such as laptops and portable devices. Launched as part of Toshiba's MK series, this 1TB hard drive is recognized for its impressive balance of performance, efficiency, and reliability, making it a favored choice among manufacturers and consumers alike.

One of the main features of the MK1016GAP is its form factor. It adheres to the standard 2.5-inch size, which is ideal for integration into slim and lightweight laptops. This compact design does not compromise on storage capacity; with 1TB of data storage, users can comfortably store vast amounts of data, including multimedia files, documents, and applications.

The MK1016GAP employs advanced technology to enhance its functionality. Notably, it uses a SATA interface, specifically SATA 3.0 (also known as SATA II), which allows for faster data transfer rates compared to older interfaces. The speed enables optimal performance during data-intensive tasks, reducing wait times when accessing or saving large files.

In terms of performance, the MK1016GAP operates at 5400 RPM, which is a common rotational speed for mobile drives. While it may not match the superior speeds of higher RPM drives, 5400 RPM strikes a healthy balance between power consumption and performance, making it suitable for typical laptop workloads. Additionally, the drive features a 8MB cache, which helps improve data retrieval times.

Toshiba employs several technologies in the MK1016GAP to enhance durability and longevity. The drive is designed to withstand the rigors of everyday use, with features that help protect against shocks and vibrations, a critical aspect for mobile devices. Also, the drive incorporates power management features, ensuring efficient energy use, which is essential for preserving battery life in portable applications.

Moreover, the MK1016GAP supports advanced security features, including S.M.A.R.T. (Self-Monitoring, Analysis, and Reporting Technology), allowing users to monitor the health of the drive proactively. This can help in anticipating potential failures and data loss.

In conclusion, the Toshiba MK1016GAP is a versatile and robust hard disk drive that meets the needs of mobile computing with its compact design, substantial storage capacity, and efficient performance. Its advanced technologies and design integrity ensure that it remains a relevant choice for users seeking reliable and effective storage solutions in their laptops and portable devices.