Toshiba B-450-QQ Series owner manual Cleaning the Strip Unit

Page 24

11. GENERAL MAINTENANCE

EO1-33006

11.3 REMOVING JAMMED PAPER

2.Fit the enclosed Allen Key into the right side of the cutter unit to rotate the cutter manually. Remove the jammed paper and any paper particles from the cutter.

3.Clean the cutter with dry cloth.

Allen Key

Cutter

Fig. 11-6

4.Assembling is reverse order of removal.

Cleaning the Strip Unit

WARNING!

1.Be sure to disconnect the power cord before cleaning the strip unit.

2.Do not touch the moving parts. To reduce the risk that fingers, jewelry, clothing, etc., be drawn into the moving parts, push the switch in the "OFF" position to stop movement.

1.First push the strip lever toward the printer to release the hook, and then pull the strip lever.

2.Remove the jammed paper, if any.

3.Clean the strip guide rollers A and B with a cloth moistened with alcohol.

Strip Guide Roller B

Strip Lever

Strip Guide Roller A

Fig. 11-7

11-4

Image 24
Contents QQ Series Page Safety Summary Precautions Request Regarding MaintenanceTable of Contents Accessories IntroductionApplicable Model 5 2 T S 1 0 Q Q P a CSpecifications General SpecificationsPrinting Specifications MSI, ITF, NW-7, CODE39, CODE93, CODE128Ribbon Specifications OptionAppearance FRONT/REAR ViewOperation Panel DIP Switch Functions DIP SWOFF SET UP Procedure Setting UP the PrinterRequirements for Operation DB-9SInstallation Procedure Installing the Supply Holder UnitConnecting the Power Cord and Cables Loading the Ribbon Guide Wheel Loading the Paper Page Batch type Strip type Threshold Setting PauseCARE/HANDLING of the Paper and Ribbon General Maintenance CleaningCovers Cleaning the Cutter Unit Removing Jammed PaperCleaning the Strip Unit Troubleshooting Error type Problem SolutionCutter Error Problem SolutionAppendix Error LED Power LEDIndex ON-LINE LED