Toshiba BSV4TGS10QMR manual Connecting the Power Adapter and the Power Cord

Page 13

2. PRINTER SETUP

ENGLISH VERSION

2.5 Connecting the Power Adapter and the Power Cord

2.5Connecting the Power Adapter and the Power Cord

NOTES:

1.Since the power cord is not enclosed in this printer, please purchase a proper one after referring to page 1-2.

2.The EA10953 AC adapter should be exclusively used for the B-SV4 Series printer. The B-SV4 Series printer must be powered by the EA10953 AC adapter.

1.Make sure that the printer power switch is in the OFF (O) position.

2.Insert the Power Cord into the inlet of the Power Adapter.

Power Cord

Power Adapter

3.Insert the Power Adapter connector into the Power Jack on the rear of the printer.

Power Jack

Power Adapter Connector

4.Plug the other end of the Power Cord into a grounded outlet as shown in the figure below.

E2- 4

Page 12 Page 14
Image 13
Page 12 Page 14
Contents SV4T-GS10-QM CE Compliance for EU only Iii Precautions Table of Contents Product Overview When purchasing the power cord Front View DimensionsRear View Interior Button and Indicator Lamp Precautions Printer SetupON/OFF Turning OFF the Printer Connecting the Cables to the PrinterConnecting the Power Adapter and the Power Cord Loading the Media Media Guide Loading the Media External Media Roll Hanger Option Loading the Ribbon Media Sensor Print test label sample Cleaning MaintenancePrint Head Cover Platen/SensorsCare/Handling of the Media Troubleshooting Guide TroubleshootingRemoving Jammed Media A1.1 Printer Appendix 1 SpecificationsA1.3 Media A1.2 OptionsA1.3.1 Media Type A1.3.1 Media Type A1.3.4 Effective Print Area A1.4 RibbonInterface Cables Appendix 2 InterfaceGlossaries
Top Page Image Contents