Designed for the PEtro-Chem Market, Testing

Designed for the PEtro-Chem Market

Toshiba’s EQPIII-841 motors are designed for the harshest environments where premium performance and reliability are a must. These motors are built to meet or exceed IEEE standard 841-2001 specifications and are designed to meet NEMA Premium® efficiency levels. In addition, the EQPIII-841 is provided with CSA

EXTREME MOTOR PRODUCTS approval and UL component recognition.

Construction	Insulation System	Nameplate	Bearing System	Conduit Box

• Cast Iron Frame and	• System’s Major Components
Bearing Brackets	Made from Class-H Materials
• Multi-Mount Construction	• Low Loss Electrical Steel
• Gasket Provided Between	with 1000ºF
Motor Frame and Conduit	Burnout Capability
Box	• System Meeting NEMA
• Typical Unfiltered	MG1 Part 31
Vibration Levels of 0.04	• Voltage Withstand Capbility of
Inches/Second or Less	2000 V in 0.1 Inches/Second
• Protective Coating on	• Large Thermal Margins for
All Internal Machined	Extended Life and Reliability
Surfaces	• Phase Paper and Coil Bracing
• IP55 Protection	on Both Ends on All Ratings
• Breather Drains	• Heavy-Build Class-H Varnish
	with Additional Insulation
	Barrier
	• 150°C Rated

•Stainless Steel

•NEMA Premium® Design

•Raised Letters for Clarity

•Inverter Duty Rating on Nameplate

(1 to 200 HP, 4 & 6 pole)

•Seperate Lubrication Label

•Compliance with IEEE 841 Standards

•Re-Greaseable Oversized 300 Series Bearings on All Frames and Both Ends

•Low Temperature Rise for Extended Life

•L-10 Bearing Life of 150,000 Hours Direct Coupled

•L-10 Bearing life of 50,000 Hours Belted

•Inpro/Seal® on All Frames, Both Ends

•Open Regreaseable Bearings, All Frames

•Gasketed Cast Iron

•UL Ground Lug

•Lead Separation Protection

•Protective Internal Coating

•12-Inch Minimum Lead Lengths

•Terminal Lugs on All Frame Sizes

Lead Cable

Testing

•100% No-Load Commercial Test on All Motors

•Vibration Test on All Motors

•100% Inspection of Foot- Flatness and Shaft Runout on All Motors

•On 440 Frame & Larger, 100% of Bearings are Ball-Pass Frequency Tested

•Commercial and Vibration Test Report Supplied with Motor

MOTORS ADJUSTABLE SPEED DRIVES CONTROLS UPS

INSTRUMENTATION

PLC

INDUSTRIAL DIVISION

13131 West Little York Road, Houston, Texas 77041 Tel 713/466-0277 Fax 713/466-8773

US 800/231-1412 Canada 800/872-2192 Mexico 01/800/527-1204 www.toshiba.com/ind

Available Through:

*LVMEQP3841080210*