Toshiba 1500 Plus Battery Backup Time, Battery Low Voltage Tolerances, Battery Check Function

Page 22

TOSHIBA

5.0Operating the UPS

5.7Battery Backup Time

The UPS unit's batteries provide about 5-12 minutes of back-up time depending on the capacity of the UPS. These times are valid when a unit is operating under full load. When the units are operating at half load, the batteries can power the load equipment about 3 times longer. The exact length of these times will depend on the UPS model used, condition of the batteries, amount of load, temperature and other variables. See battery backup time in the standard specifications Sections 4.1 through 4.2.

5.8Battery Low Voltage Tolerances

Excessive discharge will cause the UPS unit's battery voltage to drop. The chart shown below lists the voltage level at which each UPS unit's low-voltage alarm will sound and also at what level the low-voltage condition will cause the unit to automatically shut down.

UPS Capacity

600VA

800VA

1000VA

 

 

 

 

Nominal voltage

60.0

60.0

60.0

in Vdc

 

 

 

 

 

 

 

Alarm voltage

52.8

52.8

52.8

in Vdc

 

 

 

 

 

 

 

Shutdown voltage

48.0

48.0

48.0

 

 

 

 

5.9Battery Check Function

Part of the UPS start-up procedure is an automatic 'Battery Check' to see if a problem exists in the battery circuit. When the UPS is started it will begin operation in the bypass mode. An automatic voltage level test of the batteries is made while operating in the bypass mode for five seconds. A failure of this first test will activate visual and audible alarms (see section 5.3.3 "battery problem"). If this test is passed, then the UPS will auto- transfer from bypass mode to on line operating mode. A ten second automatic voltage check of the batteries is made after the UPS has auto-transferred from bypass to on line mode. Normal on line operation continues if the second test is passed. If the second test fails, then the "Fault" LED will flash and up to three additional automatic battery voltage checks are made at 3 hour intervals while the inverter continues to operate. If the batteries are found to be normal during one of these three tests then the "Fault" LED will stop flashing and normal inverter operation will continue. A failure of the third and final check will activate visual and audible alarms (see section 5.3.3 "battery problem") causing an auto-transfer back to bypass. If the batteries are indicated "bad" then

STOP the UPS and allow a 24 hour charge on the batteries before restarting.

5.10System Reset

The UPS is reset by moving the STOP/RUN switch from "run" to "stop" and then back to "run". Use the reset procedure to transfer from bypass back to inverter after a fault occurs. Some faults may only be cleared by shutting down the UPS, waiting for all LED's on the front panel to go off, and then restarting the UPS.

5 - 6

Page 21 Page 23
Image 22
Page 21 Page 23
Contents 1500 Plus Series Page Toshiba Contents Section Preventive Maintenance/Parts Replacement Contents ContdTroubleshooting Procedures External Dimensions/Panel Layout/Shipping WeightsIntroduction General Safety Instructions Important Safety Instructions Model Capacity Manufacturer Type QuantityImportant Safety Instructions ViiInstructions Importantes Concernant LA Sécurité ViiiTheory of Operation Power BackupPower Conditioning Application and UseStorage of UPS equipment Inspection of the new UPS equipmentAfter Uncrating AvoidInstallation Precautions General Prestart Precautions Operating PrecautionsSpecifications Standard Series Specifications Model NumberUE1E1E006-5M Battery Backup Mode Operation Modes AC Input Mode normal operationPower flow in AC input mode Power flow in battery backup modePower flow in circuit-bypass mode Operation Modes Circuit-bypass modeSystem Protection Features Visual and Audible Indicator Function Chart Condition Cause Operation Monitoring Visual Indicator FunctionsAudible Alarm Functions Indicators OperationUPS On-Line Mode Display Front Panel LayoutBattery Recharging Rated battery voltagesBattery Check Function Battery Backup TimeBattery Low Voltage Tolerances System ResetDB25 Connector Pinout Pin Symbol DescriptionUPS Shutdown via RS-232C RS-232C Serial Communication InterfaceDry Contact Interface Non-Fatal Fault Mode Non-Fatal Fault Mode Display ChartFatal Fault Mode Fatal Fault Mode Display ChartPreventive and Scheduled Maintenance/Parts Replacement Preventive MaintenanceFuse Rating Chart Fuse ratingExternal Dimensions/Shipping Weights/Panel Layout External DimensionsModel Pounds Kilograms Panel Layout Shipping WeightsShipping Weight 48.8 22.2Toshiba International Corporation

1500 Plus specifications

The Toshiba 1500 Plus is renowned for being a versatile multifunction printer designed to meet the demands of both small businesses and large enterprises. This printer excels in delivering high-quality printing, copying, scanning, and faxing capabilities, making it an essential device in any modern office environment.

One of the standout features of the Toshiba 1500 Plus is its advanced printing technology. With a resolution of up to 1200 x 1200 dpi, it produces crisp and clear documents that showcase text and images in great detail. The printer offers impressive print speeds, capable of outputting up to 45 pages per minute for black and white documents, ensuring that workflow remains uninterrupted during busy periods.

The device is equipped with an automatic duplex printing feature that not only enhances productivity but also reduces paper consumption, contributing to office sustainability efforts. For additional efficiency, the Toshiba 1500 Plus supports a wide range of media types and sizes, accommodating everything from plain paper to glossy photo paper, and from labels to envelopes.

In terms of usability, the Toshiba 1500 Plus boasts a user-friendly touchscreen interface that simplifies operation and navigation through various functions. Users can easily access printing, copying, and scanning settings, making it intuitive for both seasoned professionals and less tech-savvy individuals.

Document scanning capabilities are robust, with the inclusion of a high-speed document feeder that allows for quick and efficient processing of multiple-page documents. The scanner supports various file formats and resolutions, catering to diverse organizational needs. Additionally, the faxing feature ensures that businesses can still communicate efficiently with clients and partners without relying solely on digital methods.

Connectivity options abound in the Toshiba 1500 Plus. It supports USB, Ethernet, and wireless connectivity, allowing users to print from multiple devices, including smartphones and tablets. This flexibility is crucial in today's increasingly mobile work environments.

Security is a key characteristic of the Toshiba 1500 Plus. It incorporates several security features to protect sensitive information, offering password protection, secure print functions, and data encryption. This focus on security helps businesses comply with industry regulations and safeguard confidential documents.

In conclusion, the Toshiba 1500 Plus is more than just a printer; it is a comprehensive solution for modern office needs. With its blend of high performance, user-friendly design, and advanced connectivity options, it stands out as a reliable choice for organizations looking to enhance productivity and streamline document management.
Top Page Image Contents