Toshiba 4200FA CT/XT user manual Equipment Placement

Page 19

TOSHIBA

3.0 Installation Precautions

Based on the 4200FA UPS external dimensions and the way the outer panels are removed; minimum amounts of unobstructed space around the unit are necessary for ventilation and maintenance access. The following section and Fig. 3.1 shows the minimum clearances required for proper UPS site installation.

3.1Equipment Placement

1)Do not install the UPS on an inclined surface, or areas that are subject to frequent vibrations or jolting. This could damage UPS circuits.

REAR

6” (152mm)

2)Do not allow liquids or foreign objects to get inside the UPS.

3)Allow at least 20” (500 mm) on the front side and 6" (152 mm) on the rear and sides of the UPS unit for air ventilation and maintenance access.

4)Do not install the UPS in a location that is subject to high humidity. Also, do not install the unit in areas that are exposed to direct sunlight, or contaminated areas subject to high levels of airborne dust, metal particles, or flammable gasses.

5)Verify the ventilation and air conditioning system at the site is capable of removing the heat generated by the UPS.

Ambient temperature range for operating the UPS is 32 – 104 °F (0 – 40 °C); 77 °F

(25 °C) is the recommended operating temperature for maximum battery life.

6)Avoid installation near sources of electrical noise. Always make sure that the unit's ground is intact to prevent electrical shock and help prevent electrical noise.

7)This UPS generates and radiates radio- frequency energy during operation. Although RFI noise filters are installed inside the unit there is no guarantee that the UPS will not influence some sensitive devices, which are operating in near proximity. If such interference occurs, the UPS should either be installed farther away from the affected equipment and/or powered from a different source than the affected equipment.

LEFT

RIGHT

6” (152mm)

6” (152mm)

FRONT

20” (500mm)

Fig 3.1

4200FA CT/XT User’s Manual

18

Page 18 Page 20
Image 19
Page 18 Page 20
Contents 4200FA CT/XT 4200FA CT/XT Important Notice Table of Contents UPS Protection System Purpose and Scope of Manual General Safety Instructions Equipment Warning Labels Hazardous Voltages Toshiba 15 kVA 25 kVA 30 kVA 50 kVA Rated Output Rating Important Safety InstructionsToshiba To be performed by Qualified Personnel only Conserver CES Instructions Application and Use Power BackupPower Conditioning Theory of OperationUnpacking the new UPS equipment 15/25/30 kVA Unpacking the new UPS equipment 50 kVA Before storing Inspection of the new UPS equipment After UnpackingStorage of UPS equipment AvoidEquipment Placement Operating Precautions System Preparation Pre-PowerPower Connections 15/25/30 kVA with Internal Batteries UPS Connections Power ConnectionsPower Connections 15/25/30 kVA with Internal Transformer Torque Inch-lbs L1 L2 L3 N L1-L3 Phase a B C 15 kVA 25 kVA 30 kVA Input H1 H2 H3Maximum Wire Size is 2 AWG TorqueToshiba 15/25/30 kVA Battery ConnectionPower Connections 50 kVA H1 H2 H3 Battery + 50 kVA250MCM In-lbs Maximum Wire Size for Battery is 250MCM Phase a B C 50 kVA Input H1 H2 H3Power Connection Cable Routing and Conduit Placement 50 kVA Terminal # AWG Torque Control Circuit and External Interface Connections 50 kVACommunication Interface Remote Contact UPS Shutdown via RS-232C 2 RS-232C15 kVA 25 kVA 4200FA 15/25 kVA w/Internal Transformer 30 kVA 4200FA 30 kVA w/Internal Transformer 50 kVA 4200FA 50kVA w/Internal Transformer Power flow in AC Input Mode AC Input Mode Normal OperationPower flow in Bypass mode for the Alternate Input Models Bypass ModePower flow in battery backup mode Battery Backup ModeBattery Low Voltage Tolerances Battery Backup Time and Discharge ProcessModels 15/25/30/50 kVA Min Battery RechargingRated Battery Voltages FloatFront Panel Layout All Units EPO Emergency Power Off FunctionCondition Audible pattern Audible Alarm FunctionsLED Light Emitting Diode Functions Display Message Translation LED Light Emitting Diode System StatusLCD Liquid Crystal Display Functions Line-1 System MessagesDisplayed Message Translation Line-2 System Fault MessagesLine-3 System Messages Line-4 System MessagesUPS Start UP Please Wait Initial Battery ChargeStart-up Procedure Maintenance Bypass Procedure Shutdown ProcedureFrom UPS to Maintenance Bypass Keypad Overview Buzz18.2 Key Functions 6.18.1 Moni18.3 OUT MENU, F1, ENTER, UP, & Down Keys Batt KeyBatt Test Key Buzz Stop Key Reset KeyAdjusting the Buzzer Volume Menu Data Screens Settings for Calendar and ClockSettings for Display Duration Serial Com Station Address Run Switch SelectEqualize Charge Mode Select Output Voltage AdjustmentOverload Operation Reset to Default SettingsBackup History and Fault History Backup History # #MIN##SEC VB=324V BT *PF OL System Protection Functions System Protection FeaturesStart-up Preventive MaintenanceRecommended Semi-Annual maintenance Parts ReplacementExternal Dimensions 15/25/30 kVA External Dimensions 50kVA Shipping Dimensions All 50 kVA models Standard With crate Page Industrial Division

4200FA CT/XT specifications

The Toshiba 4200FA CT/XT is a noteworthy entry in the realm of advanced technology, specifically designed to cater to a variety of needs, ranging from personal computing to specialized applications. This device combines innovative features and robust specifications, making it a popular choice among professionals and tech enthusiasts alike.

At the heart of the Toshiba 4200FA CT/XT lies its powerful processing unit, which ensures smooth operation across multiple applications. The device is equipped with a high-performance processor capable of handling demanding tasks, making it suitable for both casual users and those engaging in more intensive workflows. This enables the device to support multitasking effectively, allowing users to switch between applications without experiencing lag.

One of the standout features of the 4200FA CT/XT is its display. The device boasts a high-resolution screen that delivers vibrant colors and sharp imagery. This makes it ideal for media consumption, graphic design, and any task where visual fidelity is paramount. The screen also features advanced technology to enhance viewing angles and reduce glare, providing a comfortable experience in various lighting conditions.

The Toshiba 4200FA CT/XT is also designed with connectivity in mind. It comes equipped with multiple ports, including USB and HDMI options, allowing users to easily connect peripherals and external displays. Wireless connectivity options, such as Wi-Fi and Bluetooth, further enhance the device's versatility, enabling seamless integration with other devices and networks.

In terms of storage, the 4200FA CT/XT offers ample capacity to accommodate large files and applications. It utilizes advanced storage technologies that enhance data transfer speeds and reliability. This ensures that users can access their files quickly and efficiently, which is crucial for high productivity environments.

Another vital aspect of the Toshiba 4200FA CT/XT is its build quality. The device is constructed with durable materials, providing a sturdy feel while remaining lightweight for portability. This makes it a practical option for users who need to travel frequently or work in different locations.

In summary, the Toshiba 4200FA CT/XT is a feature-rich device that offers a blend of performance, versatility, and durability. Its powerful processing capabilities, high-quality display, extensive connectivity options, and reliable storage solutions make it a standout choice for a wide range of users. Whether for professional or personal use, the Toshiba 4200FA CT/XT continues to uphold Toshiba's legacy of delivering quality technology solutions.
Top Page Image Contents