Installation Procedure

ASD-TB1-SIM9 Installation Procedure

The ASD-TB1-SIM9is used to demonstrate the many powerful features of the 9-Series ASDs and may be used with any of the 9-Series ASDs.

The ASD-TB1-SIM9was developed to emulate the input/output control signals of the 9-Series ASDs. The simulated input signals of the ASD-TB1-SIM9are provided via switches and pots.

The switches simulate discrete input signals, such as relays and contactors — the pots simulate analog inputs, which may be voltage or current. The ASD-TB1-SIM9uses LEDs to provide the status of the AM, FM, OUT1, OUT2, and Fault signals.

The ASD-TB1-SIM9 connects to the Control Board and is installed using same slide-in method as the Terminal Board that is normally used with the 9-Series ASD.

WARNING

This procedure is to be performed by Qualified Personnel ONLY. See the Installation and Operation Manual of the ASD being used for the complete description of the discrete and analog operational applicables, and ASD safety precautions and requirements.

Ensure that the 3-phase input power to the ASD is off and that the circuit is properly locked out and tagged out as per your local, regional, and/or state regulatory agency. Failure to do so may result in equipment damage, injury, or death.

To prevent electrical shock, ensure that the front cover of the 9-Series ASD has been secured before applying power to the unit.

Installation Procedure
1.	Open the front door of the 9-Series ASD and remove the lower front cover.
2.	Loosen the Torx→ screw at the upper-right side of the Terminal Board.
3.	Remove the factory-installed Terminal Board from the 9-Series ASD.
4.	Insert the ASD-TB1-SIM9into the 9-Series ASD. Ensure that the male S106 connector of the ASD-
	TB1-SIM9seats securely into the female connector of the 9-Series ASD Control Board.
5.	Secure the ASD-TB1-SIM9using the Torx→ screw in the upper-right side of the ASD-TB1-SIM9.
6.	The Torx→ screw in the upper-right side of the ASD-	Figure 1. ASD-TB1-SIM9 PCB.
	TB1-SIM9does not require much torque to secure	Figure 1. ASD-TB1-SIM9 PCB.
	TB1-SIM9does not require much torque to secure
	the ASD-TB1-SIM9into the 9-Series ASD. Once
	the Torx→ screw begins to resist turning, less than ½
	of a turn is required to tighten securely.
7.	Replace the lower front cover and close the door of
	the 9-Series ASD.
ASD-TB1-SIM9		Document Number 59707-000

ASD-TB1-SIM9 specifications

The Toshiba ASD-TB1-SIM9 is an innovative solution designed to cater to modern connectivity needs, particularly in consumer electronics and digital devices. This advanced device is particularly noted for its multifunctional capabilities, which emphasize versatility and user-friendliness. One of the standout features of the ASD-TB1-SIM9 is its robust communication technology, allowing seamless connections with multiple devices and systems.

Equipped with state-of-the-art wireless technology, the ASD-TB1-SIM9 supports various communication protocols, ensuring compatibility with a wide range of products. This adaptability makes it ideal for applications in smart homes, where devices such as smartphones, tablets, and smart appliances must interact in a cohesive manner. The integrated Bluetooth and Wi-Fi functionalities offer users the convenience of connecting wirelessly without compromising on performance or range.

Another significant characteristic of the Toshiba ASD-TB1-SIM9 is its compact design. This small form factor allows it to fit into various environments without taking up much space. Whether used in home entertainment systems or industrial applications, its portability and ease of integration are key advantages. Additionally, the device is built to withstand varying environmental conditions, making it a reliable choice for outdoor and rugged applications.

In terms of energy efficiency, the ASD-TB1-SIM9 is designed with power-saving features that optimize performance while minimizing energy consumption. This characteristic caters to environmentally conscious consumers and businesses aiming to reduce their carbon footprint.

Performance-wise, the Toshiba ASD-TB1-SIM9 excels with low-latency connections and high data transfer rates. This results in a smooth user experience, whether for streaming high-definition media content or conducting real-time data transfers in business settings.

Security is paramount in today's digital landscape, and the Toshiba ASD-TB1-SIM9 addresses this concern with robust encryption protocols designed to protect user data during transmission. This emphasis on security ensures that users can engage with technology without the fear of data breaches or unauthorized access.

Overall, the Toshiba ASD-TB1-SIM9 stands out as a reliable, multifunctional device equipped with modern technologies to meet diverse connectivity needs. Its blend of advanced features, compact design, energy efficiency, and strong security measures makes it an attractive option for both individual consumers and businesses looking to enhance their digital ecosystems.

ASD-TB1-SIM9 Installation Procedure

Figure 1. ASD-TB1-SIM9 PCB.

ASD-TB1-SIM9 specifications