TOSHIBA AT200
Inserting a memory media
The following instructions apply to all types of supported media devices. To insert a memory media, follow the steps as detailed below:
1.Turn the memory media so that the contacts (metal areas) are facing down.
2.Insert the memory media into the memory media slot on the tablet.
3.Push the memory media gently to ensure a firm connection is made.
Figure 7-1 Inserting a memory media
1
2
1. Memory media slot | 2. Memory media |
Make sure memory media is oriented properly before you insert it. If you insert the media in wrong direction, you may not be able to remove it.
When inserting memory media, do not touch the metal contacts. You could expose the storage area to static electricity, which can destroy data.
Do not turn the tablet off or switch to Sleep Mode while files are being copied - doing so may cause data loss
Removing a memory media
The following instructions apply to all types of supported media devices. To remove a memory media, follow the steps as detailed below:
1.Make sure all file operations are finished.
2.Tap Apps -> Settings -> Storage -> Unmount SD card.
3.Push the memory media until you hear a click to partially release it.
4.Grasp it and pull it out of the slot.
Do not remove the memory media while the tablet is in Sleep mode. The tablet could become unstable or data in the memory media could be lost.
SIM card slot
Some models are equipped with a SIM card slot that allows you to assemble a SIM card from your wireless service provider to use your provider’s mobile networks for transmitting data.
User's Manual |