Hardware Description
7.3Remote functions
POWER: Turns the power ON or OFF
SOURCE: Selects input source (AV1, AV2,
A)
APC (Auto Picture Control): Selects Picture mode [J 11]
ACC (Auto Color Control): Selects Color tone [J 11]
AV1: Selects AV1 input source
AV2: Selects AV2 input source
PC: Selects DVI input source
AUTO: Auto geometry adjustment (only in DVI mode)
MUTE : Mutes the sound
MENU: Enters and exits the OSD menu [J 11]
EXIT: Exits the OSD menu
VOL◀▶: Adjusts the level of audio volume
UP/DOWN: Moves upwards/downwards in the OSD menu
ENTER: Enters an OSD submenu or accepts your selection
INFO: Displays information about input source and picture mode
STILL: Pauses the picture
7.4Power management
This monitor features a power management system to “power down” upon receipt of a signal from a VESA
Display Power Management Signaling (DPMS) is a VESA interface standard that reduces power to computer monitors, when not in use. DPMS defines 4 power management modes for monitors in idle state: Power On, Standby, Suspend and Power Off.
Power consumption
Mode | Power consumption |
Power On | < 50 W |
|
|
Standby | < 11 W |
|
|
Suspend | < 11 W |
|
|
Power Off | < 8.5 W |
|
|
LED Indicator
Mode | Color |
Power On | Green |
|
|
Standby | Red blinks |
|
|
Suspend |
|
|
|
Power Off | Red |
|
|
Monitor operation
Normal operation
Screen blanks after preset idle time and the monitor shuts down
Not operation
9
Building Technologies | CMTC1713_1913 User Manual |
Fire Safety & Security Products | 19/12/2008 |