Toshiba MD-0101 manual Adu Pwa, ADU motor

[E] ADU PWA		Screw	Clamp
1.	Detach ADU hinge cover F. (See Fig. 6-1)
2.	Detach ADU hinge cover R. (See Fig. 6-2)
3.	Remove ADU. (See Fig. 6-5 to 6-9)
4.	Detach ADU cover. (See Fig. 6-10 to 6-12)		PWA cover
5.	Remove 4 screws, release the harness from the
	clamp, and detach PWA cover.
		Screw
			Clamp

234

Fig. 6-13

6.Detach all the connectors from ADU PWA, re- lease 4 locking supports, and remove ADU

Locking support

PWA.

ADU PWA

			235
		Fig. 6-14
[F] ADU motor		CN216
1.	Detach ADU hinge cover F. (See Fig. 6-1)
2.	Detach ADU hinge cover R. (See Fig. 6-2)
3.	Remove ADU. (See Fig. 6-5 to 6-9)		ADU motor
		Connector
4.	Detach ADU cover. (See Fig. 6-10 to 6-12)
5.	Detach one connector from ADU PWA (CN216),
	remove 2 screws, remove ADU motor by slid-
	ing in the direction of the arrow.	ADU motor
Note: Apply 0.1g of GREASE (X5-6020) to the		Screw	236-1
	gear tooth surface.	Fig. 6-15

MD-0101 DISASSEMBLY AND REPLACEMENT 6 - 4 October 2000 © TOSHIBA TEC