Kustom HV 30 owner manual HV30 Effects, Slap Back

HV™30 Effects

Effects Level This control adds the digital effects section and mixes it into the main signal. Sixteen different effects are available.

Program Select This switch will select any of the sixteen different effects.

Effects Active This switch engages the digital effects section. The footswitch over-rides this switch when it's plugged into the amp.

Toggle Tap This switch is a dual function depending on which effects program is selected. On “toggle” effects, this button pages through alternate variations of the effect. For example, for the Spring Reverb, it pages through 3 different degrees of brightness. On “tap” effects, this button selects the rate time at which the effect cycles, by tapping the switch twice. For example, for the Delay setting, it selects the amount of time between delay repeats (If the 2nd tap is beyond the maximum setting, the time will default to the longest available choice).

Effect Program	Description	Toggle	Tap	Toggle Tap Function
Spring Reverb	simulates the spring reverb pan found in vintage tube amps	X		pages through 3 different degrees of reverb brightness
Slap Back	a fast 80ms delay for getting those Rockabilly tones	X		toggles between Slapback and Slapback/Reverb
Chorus	a beautiful thick chorus that can swish with the best of them		X	adjusts chorus rate time
Delay	an organic sounding delay that has that analog warmth		X	adjusts delay time….maximum delay = 680 mS
Phaser	a sweet and swooshy '70s sounding phaser		X	adjusts phaser rate time
Tremolo	a classic sounding tremolo with a hint of vibrato		X	adjusts tremolo rate time
Trem/Reverb	a combination effect of tremolo and room reverb		X	adjusts tremolo rate time
Delay/Reverb	a combination effect of the delay and room reverb		X	adjusts delay time…..maximum delay = 350 mS
Room Reverb	the reverb sound of your amp being played in a room		X	adjusts reverb decay time
Hall Reverb	the reverb sound of your amp being played in a large hall		X	adjusts reverb decay time
Flanger	a deep flanger for getting those spacey sweeping tones		X	adjusts flanger rate time
Rotary	gives you that twirling sound of those fancy old organ cabinets	X		ramps between fast and slow rotary speeds
Octave	shifts the pitch up or down one octave from the original signal	X		toggles between octave up and octave down
Auto Wah	a wah wah that automatically sweeps at your chosen speed		X	adjusts auto wah rate time
Roto/Reverb	a combination effect of Rotary with room reverb	X		ramps between fast and slow rotary speeds
Chorus/Reverb	a combination effect of chorus and room reverb		X	adjusts chorus rate time

Effects Module Memory Aside from all the versatility of the built-in effects, the effects module in your Kustom amplifier has the ability to store your favorite sounds. All the most recent changes to the Toggle Tap button are saved in each of the 16 effect locations. For example, If you tap in your favorite delay time, then go to chorus, and then go back to delay, your own tapped delay time will still be saved. These setting changes are also retained when powering down the amplifier.

To Restore Factory Settings If you ever want to restore the effects to the factory default settings, you can do this by selecting Program 1 (Delay/Reverb), then holding the tap switch down and simultaneously selecting Program 2 (Trem/Reverb).

6