Toshiba 6520c, 5520c manual Full color Text 05-1086 Printed image 05-1087

Page 258

4. e-Filing-specific Adjustments

Scan to Box

(2) When scanning the original, press the [COMMON SETTING] button on the Control Panel. Select a lower resolution in the resolution option.

*"200 (dpi)" is selected from among the resolution options by default. If moiré occurs in a resolution of 200 dpi, select a lower resolution (150 dpi is recommended.).

After changing the resolution, scan and store the original. Then print and check the print image quality. If you do not prefer to decrease a resolution, or if moiré still occurs even in a lower resolution, use other procedures.

Scan to Box

(3) When scanning, press the [COMMON SETTING] button on the Control Panel. Adjust the sharpness intensity.

• Press the [+] button on the indicator to increase the sharpness intensity or the [-] button to decrease it.

*The sharpness intensity is set to the center (±) by default. If moiré occurs by default, press the [-] button to decrease the sharpness intensity.

After adjusting the sharpness intensity, scan and store the original. Then print and check the print image quality.

With the sharpness intensity set to the minimum, if moiré still occurs, use other procedures.

Scan to Box

(4) Enter adjustment mode [05]. Change the values for codes [1086 to 1088] and [843] to adjust the sharpness intensity in the scanning functions.

*This adjustment will have an effect only on an image stored in the Full color mode or the Gray scale mode.

 

Color mode

 

Original mode

 

[05] code

Recommended value

Acceptable

Default

 

 

 

value range

 

 

 

 

 

 

 

 

 

Full color

Text

 

05-1086

 

 

 

 

Printed image

05-1087

 

 

 

 

 

 

Photo

05-1088

Set a value smaller than 128.

0 to 255

128

 

Gray scale

---

 

05-843

 

Black

Text/Photo

05-840

 

 

 

 

Text

05-841

 

 

 

 

 

 

Photo

05-842

 

 

 

*Setting "0" provides the softest image, while setting "255" provides the sharpest image.

‰Caution after the adjustment

When the original containing text and lines is scanned and printed, the adjustment may possibly cause the blurred text and lines or a blend of undesired colors. Therefore, carefully perform the adjustment, while checking the scanned-in image or printout.

e-STUDIO5520C/6520C/6530C

© 2008 TOSHIBA TEC CORPORATION All rights reserved

 

4-10

Page 257 Page 259
Image 258
Page 257 Page 259
Contents File No. SME08000800 R080621G1100-TTEC Ver002008-11 Trademarks Revision Record Page Precautions in Servicing Purpose of the Imaging ManualIcons Table of Contents Printer-specific Adjustments To Adjust the Twin-Color Copy Image QualityFiling-specific Adjustments Scanning-specific AdjustmentsTo Scan the Original, while Reducing the File Size To Obtain a Darker Image Before the adjustment After the adjustment‰ Procedures ‰ ExplanationTo adjust the copy image quality To adjust the print image qualityAcceptable Default Paper type Code SubcodePaper type Acceptable paper weight ‰ Caution after the adjustment‰ Remarks Color to adjust Code Subcode To Adjust the Density on a Solid Colored ImagePaper type not available Acceptable paper weight If the density is decreased If the density is increasedFull color mode Paper type Color to adjust Code Subcode Black mode Paper type Color to adjust Code SubcodeArea MFP mode How to perform automatic calibration‰ Caution after the adjustment Before the adjustment ‰ Explanation After the adjustmentTo eliminate blur and graininess from an image Paper type Code Subcode Page 08-5293 Color Paper ‰ Caution after the adjustment ‰ Remarks To optimally program image quality control Value for Difference in drum temperature Value for Difference in relative humidity08-571 Value for Page ‰ Caution after the adjustment To Correct Out-of-Registration Colors Code Test print pattern Paper size No. of copiesPattern a for out-of-registration colors Pattern B for out-of-registration colorsColors ‰ Caution after the adjustment Copier-specific Adjustments To Adjust the Copy Image Quality in the Black Mode Original mode Code Recommended Acceptable DefaultOriginal mode Code Subcode Recommended Acceptable Default Subcode Area where the density is adjusted ‰ Caution after the adjustment To Adjust the Copy Image Quality in the Full Color Mode Original mode Code Recommended valueColor to Code Recommended value Acceptable Default ‰ Caution after the adjustment To Adjust the Copy Image Quality in the Auto Color Mode Original mode Code Subcode Recommende Acceptable Default ‰ Caution after the adjustment To Closely Match the Color Balance of the Original Copier-specific Adjustments 05-1779 Text 05-1780 Printed image 05-1781 Yellow ‰ Caution after the adjustment To Improve the Reproducibility of Gray Subcode Area where the density is adjusted To Copy in Vivid Colors Copier-specific Adjustments Subcode Area where the density is adjusted Acceptable Default Adjust Paper type Color to Code SubcodeTo improve the highlight reproducibility Photo Subcode Area where the density is adjusted To Eliminate the Background Color Accep Adjustment Original mode Code Recommended Default Setting Range correction Operation05-1691 Map 05-1692 05-1779 Text 05-1780 Printed image 05-1781 Yellow ‰ Caution after the adjustment After the adjustment To Adjust the Copy Image Quality in the Black Mode Accep Adjustment Original mode Code Recommended Default Accept Original mode Code Subcode Recommended Able Default To Adjust the Copy Image Quality in the Full Color Mode ‰ Caution after the adjustment To Eliminate Moiré To change the default original mode on the Control Panel To change the default original mode in setting modeValue for Default original mode at power-on Text / Photo 05-604 Set a value smaller 05-605 Black Soft To Copy Sharply To enhance sharpness Soft Sharp Default ‰ Caution after the adjustment To Make Photo Edges Look Softer 05-7808 28 to Soft Sharp Default Color mode Original mode Code Accept Able DefaultValue Advantage of image quality ‰ Caution after the adjustment To Make Solid Filled Bold Text Logo Highly Colored To Adjust the Copy Image Quality of a Black Logo Full color Text/Photo 05-7811 Set a value larger 05-7812 To Adjust the Copy Image Quality of a Colored Logo 05-1779 Text 05-1780 Yellow User custom 05-7980 To Sharply Contrast the Hues of Highlighters on the Copy Code Subcode Acceptable value range Default Subcode Color to adjust05-1783 User custom 05-7980 To Obtain a Good Color Balance on Thick Paper Paper type Code Recommended value Acceptable Default Value for Display for user calibrationPaper type Acceptable paper weight Subcode Area where the density is adjusted To Obtain Smooth Gray-Scale Photo Images ‰ Procedures To Change the Threshold in Auto Color Mode OriginalValue Threshold to adjust Code Acceptable To Adjust the Twin-Color Copy Image Quality To Adjust the Tint of Colors other than Black Default Recommended Mode to adjust Code Subcode Default To Adjust the Image Quality Scanned from the Radf Color mode Code Recommended value Acceptable Default Value Advantage of image quality Reproductivity Background05-7765 Set a value larger than 128 to Twin Color 05-7766 To Adjust Custom Mode Settings in Black Mode To Program Frequently Used Copy SettingsTo Use Custom Mode Value for Custom mode for black modeCode Recommended value Acceptable Default Range Value Base Density mode Code Original Accepta Ble DefaultTo adjust copy density To increase the sharpness intensityTo adjust gamma balance in medium- and high-density areas To adjust the changing amount of ACS Adjustment indicatorDefault Original Direction Range Mode Indicator Default OriginalTo make background lighter Ble Default Original Mode Range Value‰ Cautions after the adjustment Base Accepta Density CodeDefault Mode Range Value To Adjust Custom Mode Settings in Color ModeValue for User mode for color mode 506 Base Accepta Density Ble Original CodeOriginal Density mode Code Recommend Acceptable Default Accep Default Setting Reproducibility CharacteristicsTo copy text or photos more clearly To adjust gamma balance Accep Adjustme Original mode Subco Recommend Default CodeRange Value To Copy While Erasing Shadow Outside of Image To Avoid Copying Blank Page of Original Scanned with Radf05-7618 Set a value larger than ~255 128 To Obtain Image in Even Density Level Copier-specific Adjustments Printer-specific Adjustments Restrictions on Use of Printer FunctionsTo Maintain a Steady Color Balance PCL6 PS3 XPS Mac Plain paper Thick paper Value for Operation switching at calibration To Obtain the Desired Color Balance For Windows For Macintosh MenuGraphics, images and text, from among the Halftone options For Windows For Macintosh PDL Halftone CodeLine Art White Color As viewed on the monitor Before the adjustment To Closely Match the Color Balance on the Monitor‰ Procedures For Macintosh To Maintain a Uniform Gray Hue ‰ Procedures For Macintosh To Use Only the Black Toner to Reproduce Gray Areas Apply to Auto Text Text & Graphic ImageFor Macintosh Original Code Subcode Recommended Acceptable Default Mode Subcode Image Quality TypeTo Easily Adjust the Overall Brightness ‰ Procedures For Macintosh To Adjust the Overall Saturation ‰ Procedures For Macintosh Paper type Color to Code Subcode To Easily Adjust the Overall Contrast ‰ Procedures For Macintosh Print data Before the adjustment After the adjustment To Obtain a Sharper Print Image‰ Procedures For Macintosh To Obtain a Softer Image ‰ Procedures For Macintosh To Make Low-resolution Data Look Finer To soften an image ‰ Procedures For Macintosh To Eliminate Smudges from Highly Colored Text and Lines Change the Use Sharpness Filter option on the printer driver Quality Recommended Acceptable DefaultColor Image Code Type Range‰ Caution after the adjustment To Clearly Print Light-Colored Thin Lines or Text To Adjust the Print Image Quality in the Color Mode For Macintosh Printer-specific Adjustments For Windows For Macintosh PCL6 PS3 XPS PCL6 Subcode Apply to HintFor Windows For Macintosh Halftone Code Subcode Recommended value Default Color mode Code Sub code Recommended Acceptable Default To Make the Light-Colored Area Darker on the Printout ‰ Procedures PCL6 PS3 XPS PDL Line Art White Color Halftone Code Subcode Recommended value Default To Clearly Print Thin Lines/Double Lines For Windows For Macintosh 05-8242 Set value larger than 1200dpi ‰ Caution after the adjustment To Print in the Toner Save Mode To Decrease the Image Density and Save TonerEnable the Toner Save option on the printer driver For Macintosh To Adjust the Image Density in the Toner Save Mode Resolution Code Subcode Recommended Acceptable Default ValueTo adjust the image quality on Black and White printing To Print Illegible Gray or Colored Text in Black ‰ Remarks To Ignore Blank Pages for Printing For Windows To the combination of options To Sharply Print Black Text For Windows For Macintosh Printer-specific Adjustments Code Subcode Recommended value Value Default Range Acceptable Apply toPrinter-specific Adjustments Halftone Code Subcode Recommended Acceptable Default Adjust Photograph ‰ Remarks To check the definition of black text Printer-specific Adjustments To Prevent Dark Toner from Coming Off Subcode Paper type To use the Custom Color Settings Printer-specific Adjustments ‰ Caution after the adjustment Before the adjustment ‰ Explanation After the Adjustment To Print a Full-Color Original in Two ColorsTo Adjust Colors For Macintosh Change the Color balance option on the printer driver Halftone Subcode Value Default Adjust Code Range Color to Recommended AcceptableSelected color Color to be adjusted Yellow Magenta Cyan To Adjust the Sharpness Change the Sharpness option on the printer driver To Print a Full-Color Original in Two Colors Apply to Code Recommended value AcceptableTo Use ICC Profile To Create ICC Profiles for Printing on the Paper to be Used Printer-specific Adjustments Uncheck Use Sharpness Filter on the Image Attribute tab menu Uncheck Apply to Device Color Only ‰ Caution after the adjustment ‰ Explanation Printer-specific Adjustments Printer-specific Adjustments ‰ Caution after the adjustment ‰ Explanation Printer-specific Adjustments Printer-specific Adjustments ‰ Caution after the adjustment ‰ Explanation Printer-specific Adjustments Printer-specific Adjustments Uncheck Apply to Device Color Only ‰ Caution after the adjustment To Perform Further Adjustment After Using ICC Profiles Printer-specific Adjustments ‰ Caution after the adjustment Printer-specific Adjustments Filing-specific Adjustments To Clearly Store a B/W Image in the Auto Color ModeFiling-specific Adjustments To Store an Original while Reducing the File Size Ex. A4, 200 dpi, LOW = Approx KBTo change the default compression rate To utilize the templateTo Store a Color Photo Image, while Minimizing Moiré To Change Default Original Mode on Touch Panel To Set Original Mode for Each Job without TemplatesTo Scan Originals Using Template To Change Default Original Mode in Setting ModeTo adjust the color balance in Print to Box To Match the Color Balance on the OriginalPrint to Box PCL5c To Scan and Print, while Minimizing Moiré Full color Text 05-1086 Printed image 05-1087 To Finely Print the Image Stored in the e-Filing box To print images stored through Copy to Box or Print to BoxCopy to Box Print to Box Scan to Box RGB data ‰ Explanation To Finely Print Color Images Scanned and Stored To print images stored through Scan to Box‰ Explanation Appendix Chapter Purpose Input method Output methodFiling-specific Adjustments Scanning-specific Adjustments To Clearly Scan Text To reduce noise around textResolution File size ratio To Scan an Original, while Eliminating the Background Color To eliminate the background densityValue range To Clearly Scan and Print an Original in Black and White To improve gradation and reduce graininess‰ Caution after the adjustment To Scan the Original, while Reducing the File Size Scanning-specific Adjustments Original mode File size ratio Compression rate File size ratioProcedures used Possible image degradation To reduce the blurred area of text and photos Code Recommended Acceptable value range Default To leave the color of text as it isTo eliminate the background density Image looks too soft and blurred ‰ Procedures To Scan an Original, while Enhancing Black ‰ Procedures To Scan an Original with the Desired Gradation Recommended value Acceptable Default Value range For the Black mode Value for 08-580 Reference original mode For the Full color mode Value for Reference original modeTo have Custom selected Code Adjustment ‰ Caution after the adjustment
Related manuals
Manual 210 pages 44.8 Kb Manual 114 pages 53.4 Kb

6520c, 5520c specifications

The Toshiba e-STUDIO5520c and e-STUDIO6520c are advanced color multifunction printers designed for businesses looking to enhance productivity and efficiency in their document handling. These models combine printing, copying, scanning, and faxing functionalities into a single device, making them an ideal solution for busy office environments.

One of the standout features of the e-STUDIO5520c and e-STUDIO6520c is their impressive printing speed. The e-STUDIO5520c is capable of printing up to 55 pages per minute, while the e-STUDIO6520c can reach speeds of up to 65 pages per minute. This high-speed performance ensures that large print jobs are completed quickly, allowing businesses to maintain workflow without unnecessary delays.

Both models also feature a high-quality color printing capability with a resolution of up to 1200 x 1200 dpi. This ensures that documents, presentations, and marketing materials are produced with crisp text and vibrant colors, helping to create a professional image for any organization.

Another key characteristic of these printers is their versatile paper handling options. They are equipped with multiple paper trays, allowing users to accommodate various paper sizes and types, including envelopes and heavy stock paper. An optional high-capacity feeder can be added to increase the maximum paper capacity to suit larger print volumes.

The Toshiba e-STUDIO5520c and e-STUDIO6520c also incorporate advanced scanning technologies. With the capability to scan at speeds of up to 160 images per minute, these models streamline document management processes. Features such as duplex scanning and optional OCR (Optical Character Recognition) ensure that scanned documents are easily searchable and can be converted into editable formats.

Security is paramount in today’s business environment, and these multifunction printers come equipped with robust security features to protect sensitive information. They support secure printing, user authentication, and encrypted data transfer, providing peace of mind for organizations that handle confidential materials.

In terms of user experience, both models feature an intuitive touchscreen interface, making navigation and operation straightforward. Additionally, they support mobile printing solutions, allowing users to print documents directly from their smartphones or tablets.

Overall, the Toshiba e-STUDIO5520c and e-STUDIO6520c multifunction printers are designed to meet the diverse needs of modern offices. With their high-speed printing, top-quality output, robust security measures, and user-friendly features, they present a comprehensive solution for businesses aiming to optimize their document workflows and productivity.
Top Page Image Contents