Toshiba XM-6802B Drive Operation Inserting a Disc Horizontally, Inserting a Disc Vertically

Page 8

USING THE CD-ROM Drive – XM-6802B

Drive Operation

Inserting a Disc - Horizontally

To insert a disc into a drive that is mounted horizontally, perform the following steps:

Figure 1.Inserting Disc

1.Open the drive's Loading tray by pressing the Eject Button.

2.Place disc into drive's Loading tray

3.Press Eject button again or gently push on the open disc tray. Tray will automatically close.

Inserting a Disc - Vertically

To insert a disc in a drive that is mounted vertically, perform the following steps:

1.Locate sliding disc holders (4 locations) on drive's Loading Tray.

2.Position the disc behind the disc holders

3.Close the drive by gently pushing in the tray or pressing the eject button.

Figure 2.Inserting Disc Vertically

6

Image 8
Contents CD-ROM Drive Contents Drive Speed BUS InterfaceTypes of Disc Formats Supported Front PanelPage Setup XM-6802B CD-ROM Jumper SettingsConnecting Cables Placing CD-ROM Drive inside your ComputerInstalling Power Cable Completing InstallationDrive Operation Inserting a Disc Horizontally Inserting a Disc VerticallyEmergency Ejection Removing a DiscUsage Guidelines Cleaning Media Troubleshooting XM-6802B SolutionSpecifications -XM-6802B PerformanceAudio EnvironmentalPower ConnectorsPhysical RegulatoryDrive Connectors -XM-6802B ConnectorInterface Pin Assignments