Toshiba user manual Setup SD-R2412, Installation Notes, Software Driver

Page 5

SETUP – SD-R2412

Toshiba recommends that only trained professionals install this CD-RW/DVD-ROM Combo drive into your laptop/notebook.

Installation Notes

The SD-R2412 CD-RW/DVD-ROM Combo drive has no jumpers that need to be set

Mounting orientation: 15° (horizontally), 15° vertically (volume control in down position), 30° (drive with volume control in up position).

When mounting drive use 4 M2-PO.4 tapping holes located on the left and right sides of drive.

When mounting drive, the tightening torque of the four screws must be even. Recommended screw tightening torque is 2N

For clearance around the front bezel, it is recommended that a clearance of more than 0.8mm should be left in all directions.

Software Driver

Toshiba's SD-R2412 drive does not require any unique device drivers for Windows '98/2000/XP/NT. After installing your drive and re-booting, your system should recognize your drive. Win '98/2000/XP/NT Operating Systems support all Toshiba's ATAPI drives natively. If you prefer using DOS, download the ATAPI driver from our web site.

3

Image 5
Contents CD-RW/DVD-ROM Combination Mobile Drive Contents Introduction SD-R2412 General FeaturesTypes of Disc Formats Supported Write Types of Disc Formats Supported ReadSD-R2412 CD-RW/DVD Combo Drive Front Panel Front PanelSoftware Driver Setup SD-R2412Installation Notes Usage Guidelines Using the CD-RW/DVD-ROM Combo Drive SD-R2412Removing Media Regional Coding Cleaning MediaEmergency Ejection Handling MediaSolution Troubleshooting SD-R2412CD-R, CD-RW Specifications -SD-R2412CD-DA, CD+EG, CD-MIDI, CD-TEXT, CD-ROM, CD-ROM XA DVD-ROMReliability PerformanceConnectors PowerEnvironmental PhysicalDrive Connectors -SD-R2412
Related manuals
Manual 12 pages 56.44 Kb