Toshiba SD-M1912 user manual Front Panel, Eject Button Busy Indicator Emergency Eject Hole

CD

•CD-DA (Red Book) – Standard Audio CD & CD-Text

•CD-ROM (Yellow Book) – Standard Data

•CD-ROM-XA – Photo CD, Multi-Session

•CD-I/FMV (Green Book)

•CD-Extra/CD-Plus (Blue Book) – audio & text/Video

•Video-CD (White Book) – MPEG1 Video

Front Panel

Figure 1.SD-M1912 DVD-ROM Drive Front Panel

Eject

Button

Busy Indicator

Emergency Eject Hole

The Eject button is used to open the disc tray so you can install or remove a disc.

When you install a disc into the DVD-ROM drive, the BUSY light flashes slowly as it attempts to locate the disc. One of the following will occur:

•BUSY light goes out. The DVD-ROM drive is ready to read data from the disc.

•BUSY light flashes slowly. The disc may be dirty.

•BUSY light remains ON. The DVD-ROM is accessing data.

•BUSY light remains ON indefinitely. The DVD-ROM is experiencing an error

The emergency eject hole is to be used only when the Loading Tray will not open when Eject button is pressed.

Loading Tray Load disc using tray.