Toshiba SD-M1612 Drive Operation Inserting a Disc Horizontally, Inserting a Disc Vertically

Page 8

USING THE DVD DVD-ROM Drive – SD-M1612

Drive Operation

Inserting a Disc - Horizontally

To insert a disc into a drive that is mounted horizontally, perform the following steps:

Figure 1.Inserting Disc

1.Open the drive's Loading tray by pressing the Eject Button.

2.Place disc into drive's Loading tray

3.Press Eject button again or gently push on the open disc tray. Tray will automatically close.

Inserting a Disc - Vertically

To insert a disc in a drive that is mounted vertically, perform the following steps:

1.Locate sliding disc holders (4 locations) on drive's Loading Tray.

2.Position the disc behind the disc holders

3.Close the drive by gently pushing in the tray or pressing the eject button.

Figure 2.Inserting Disc Vertically

6

Image 8
Contents DVD-ROM Drive Contents Drive Speed Types of Disc Formats SupportedFront Panel Eject Button Emergency Eject HoleSetup SD-M1612 DVD-ROM Jumper SettingsConnecting Cables Placing DVD-ROM Drive inside your ComputerInstalling Audio Cable Completing InstallationDrive Operation Inserting a Disc Horizontally Inserting a Disc VerticallyEmergency Ejection Removing a DiscUsage Guidelines Cleaning Media Handling MediaTroubleshooting SD-M1612 SolutionSpecifications -SD-M1612 GeneralPerformance Environmental ReliabilityAudio Power ConnectorsPhysical LasersAudio Connectors Drive Connectors -SD-M1612Connector Interface Pin Assignments