Toshiba SD-C2732 user manual

Page 4

Eject Button The EJECT button is used to open the disc tray so you can install or remove a disc

Busy Indicator When you install a disc into the DVD-ROM drive, the BUSY light flashes slowly as it attempts to locate the disc. One of the following will occur:

•BUSY light goes out. The DVD-ROM drive is ready to read data from the disc.

•BUSY light flashes slowly. The disc may be dirty.

•BUSY light remains ON. The DVD-ROM is accessing data.

•BUSY light remains ON indefinitely. The DVD-ROM is experiencing an error.

Emergency

The emergency eject hole is to be used only when the DVD tray will not open when

Eject Hole

EJECT button is pressed.

DVD Tray

Insert DVD Disc in tray

Page 3 Page 5
Image 4
Page 3 Page 5
Contents DVD-ROM Mobile Drive Contents General Features Introduction SD-C2732Types of Disc Formats Supported Front PanelPage Installation Notes Setup SD-C2732Software Driver Using the DVD-ROM Drive SD-C2732 Drive Operation Inserting Media Horizontally or VerticallyRemoving Media Usage GuidelinesCleaning Media Regional CodingEmergency Ejection Handling MediaTroubleshooting SD-C2732 SolutionSpecifications -SD-C2732 PerformanceReliability EnvironmentalPower PhysicalDrive Connectors -SD-C2732 Interface Pin Assignments
Top Page Image Contents