Toshiba SD-M1802 Front Panel, Loading Tray Busy Indicator, Eject Button Emergency Eject Hole

CD

•CD-DA

•CD-MIDI

•CD-TEXT

•CD-ROM

•CD-ROM-XA

•CD-I Bridge (Photo-CD, Video CD)

•CD-I

•Multi-session (Photo-CD, CD Extra, CD-RW, CD-R)

•CD-R (Read)

•CD-RW (Read)

Front Panel

Figure 1.SD-M1802 DVD-ROM Drive Front Panel

Loading Tray

Busy Indicator

Load disc using tray.

When you install a disc into the DVD-ROM drive, the BUSY light flashes slowly as it attempts to locate the disc. One of the following will occur:

•BUSY light goes out. The DVD-ROM drive is ready to read data from the disc.

•BUSY light flashes slowly. The disc may be dirty.

•BUSY light remains ON. The DVD-ROM is accessing data.

•BUSY light remains ON indefinitely. The DVD-ROM is experiencing an error

Eject

Button

Emergency Eject Hole

The Eject button is used to open the disc tray so you can install or remove a disc.

The emergency eject hole is to be used only when the Loading Tray will not open when Eject button is pressed.