Toshiba HDD2169 user manual Installation Notes, Placing Hard Drive inside your Computer

Page 5

Installation Notes

ƒThe drive should be mounted carefully on the surface of 0.1mm or less flatness to avoid excessive distortion.

ƒIn order to prevent short-circuit under any circumstances, a space of 0.5mm or more should be kept under the PCB.

ƒSpace should be kept around the drive to avoid any contact with other parts, which may occur due to shock or vibration.

ƒThe temperature of the top cover and the base must always be kept under 60C to maintain the required reliability.

ƒBe sure not to cover the breathing hole to keep the pressure inside the drive at a certain level

ƒDo not apply any force to the top cover, except the screw areas on top cover. Maximum force to the specified area is 2N.

ƒThe drive contains several parts which may be easily damaged by ESD (Electric Static Discharge). Avoid touching the interface connector pins and the surface of PCB. Be sure to use ESD proof wrist strap when handling drive.

ƒThe four mounting screws should be tightened equally with 0.3N-m (3kgf-cm) torque. The depth should be 3.0mm minimum and 3.5mm maximum.

Placing Hard Drive inside your Computer

Determine mounting configuration (the drive can be mounted in either a horizontal or vertical orientation)

Configure drive for system application.

Configure the adapter board for the specific system application (if required).

Install adapter board into an unused PC/AT 16 bit slot (if required).

Install the I/F cable to the system's 44 pin connector port or adapter board. Ensure pin 1 is oriented correctly, (pin 1 on the cable is usually identified by a red or blue strip.)

Set correct drive type in system CMOS

Refer to applicable manuals for software installation instructions.

Important Note: Disconnect power from your computer system before beginning installation.

Figure 2.HDD Mounting Holes

3

Image 5
Contents Inch Hard Disk Drive Contents Introduction MK3018GAS HDD2169 General FeaturesMaster/Slave Settings Setup MK3018GAS HDD2169Placing Hard Drive inside your Computer Installation NotesBacking up Data Files Using the Hard Disk Drive MK3018GAS HDD2169Problem Solution Troubleshooting MK3018GAS HDD2169Specifications MK3018GAS HDD2169 Regulatory PhysicalRecommended Cable Characteristics Drive Connectors MK3018GAS HDD2169Interface Connector Drive Interface Signals

HDD2169 specifications

The Toshiba HDD2169 is a high-performance hard disk drive designed to meet the needs of modern computing environments. With a capacity of 2TB, it provides ample storage for a variety of applications, supporting both personal and professional use. This drive is an ideal solution for users who require significant storage space for their files, including documents, photos, videos, and software applications.

One of the standout features of the Toshiba HDD2169 is its 5400 RPM rotational speed. This speed, while slightly slower than higher-performance drives, strikes a balance between efficient power consumption and adequate performance for everyday computing tasks. The drive is equipped with a SATA III interface, allowing for fast data transfer rates that can reach up to 6 Gbps. This ensures efficient communication between the hard drive and the motherboard, making it suitable for both desktop and laptop applications.

Another important characteristic of the HDD2169 is its advanced caching technology. The drive utilizes a large cache buffer, which allows for improved data processing speeds during read and write operations. This cache helps to enhance overall system performance by reducing latency, particularly when accessing frequently used files.

The Toshiba HDD2169 is also designed with reliability in mind. It features an adaptive thermal management system that helps to regulate temperature, ensuring the drive operates efficiently without overheating. This is particularly beneficial in environments where heat buildup can be a concern, such as in laptops and compact desktops. Additionally, the drive's build quality adheres to rigorous standards, providing users with peace of mind regarding data integrity and longevity.

Environmental sustainability is another consideration with the Toshiba HDD2169. The drive is designed to minimize power consumption, contributing to a more eco-friendly footprint. Its low power operation not only reduces energy costs but also fits well with today’s trend towards greener technology solutions.

In summary, the Toshiba HDD2169 stands out due to its spacious capacity, reliable performance at 5400 RPM, and efficient caching technology. With robust reliability features and a focus on energy efficiency, it serves as a solid option for users seeking a dependable and spacious hard drive for their computing needs. Whether for personal use, gaming, or professional applications, the HDD2169 offers a balanced combination of performance and efficiency, making it a worthy consideration in today’s tech-savvy world.