Dell P28F001 manual Removing the Hard-Drive Assembly

Removing the Hard-Drive Assembly

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in "Before You Begin" on page 7. After working inside your computer, follow the instructions in "After Working Inside Your Computer" on page 9. For additional safety best practices information, see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.

CAUTION: To avoid data loss, do not remove the hard drive while the computer is in Sleep or On state.

CAUTION: Hard drives are extremely fragile. Exercise care when handling the hard drive.

Prerequisites

1Remove the battery. See "Removing the Battery" on page 11.

2Follow the instructions from step 1 to step 2 in "Removing the Memory Module(s)" on page 15.

Procedure

1Remove the screws that secure the hard-drive assembly to the computer base.

2Slide the hard-drive assembly forward to disconnect the hard-drive assembly from the system board.

1 2

1 screws (2) 2 hard-drive assembly

Removing the Hard-Drive Assembly 23