Dell 420 manual AGP Pro50 Card Extension, Expansion Card Removal

Page 6

132-bit PCI expansion card

232-bit AGP card

Figure 7. AGP Pro50 Card Extension

Figure 7 shows the card extension that may occupy PCI slots 1 and 2.

The following is a list of valid expansion-card combinations:

•One AGP card and five PCI cards

•One AGP card, four PCI cards, and one RAID card

•One AGP Pro50 card and four PCI cards

•One AGP Pro50 card, three PCI cards, and one RAID card

Expansion Card Removal

To remove an expansion card, perform the following steps.

CAUTION: Before you remove the computer cover, see "Precautionary Measures."

1.Remove the computer cover.

2.Disconnect any cables connected to the card.

3.Unscrew the mounting bracket of the card you want to remove.

4.Grasp the card by its outside corners, and ease it out of its connector.

5.If you are removing the card permanently, install a metal filler bracket over the empty card-slot opening.

NOTE: Installing filler brackets over empty card-slot openings is necessary to maintain Federal Communications Commission (FCC) certification of the system. The brackets also keep dust and dirt out of your computer.

6.Replace the computer cover, and reconnect your computer and peripherals to their power sources and turn them on.

NOTE: After you remove and replace the cover, the chassis intrusion detector will cause the following message to be displayed at the next system start-up:

ALERT! Cover was previously removed.

7.To reset the chassis intrusion detector, enter System Setup, select System Security, and reset Chassis Intrusion to Enabled or Enabled-Silent.

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Initial release 30 Nov Precautionary Measures OverviewRecommended Tools Restarting the System Computer CoverInterior Service Label Internal ViewFront-Panel Inserts Expansion CardsAGP Pro50 Card Extension Expansion Card RemovalExpansion-Card Guide Control PanelChassis Intrusion Switch DrivesDrive Locations Diskette Drive Removal25-Inch Drive Removal Hard-Disk Drive Bracket Removal Hard-Disk Drive RemovalHard-Disk Drive Replacement Installing a Hard-Disk Drive in the BracketScrew HooksLatch Power Supply Rotating the Power SupplySystem Board Components System Board ComponentsSystem Board Jumper Settings Description System Board JumpersRIMMs System Board LabelsRimm Removal Microprocessor/Heat Sink Assembly Microprocessor RemovalMicroprocessor Replacement Battery Cooling FanSystem Board System Board RemovalBack to Contents Overview Padlock Ring Release Computer Cover Replacement Front Panel Orientation ViewFront-Panel Insert Removal Inch diskette drive Inch drive bays Hard-disk drive Inch Diskette Drive Bracket Inch Diskette, Tape, or CD-ROM Drive Replacement 25-Inch Drive ReplacementAttaching Cables to 5.25-Inch Drives Hard-Disk Drive Installation Inserting a Hard-Disk Drive in the BracketInserting the Drive Bracket AGP Card Brace AGP Card Brace RemovalAGP Pro110 Card Extension Expansion-Card Installation Expansion-Card RemovalInstalling an Expansion Card Expansion-Card Guide and FanControl Panel Power Supply System Board Components Page AGP KYB To replace a microprocessor, perform the following steps Microprocessor Removal Microprocessor Cooling Fan Microprocessor Cooling Fan RemovalBattery Rotate the system power supply
Related manuals
Manual 71 pages 5.74 Kb Manual 52 pages 47.88 Kb Manual 10 pages 52.91 Kb

420 specifications

The Dell 420, 220, and 220S are well-regarded servers in the Dell PowerEdge lineup, showcasing robust performance and reliability for various enterprise applications. These servers are designed to meet the needs of small to medium-sized businesses, as well as larger enterprises seeking reliable computing solutions.

The Dell PowerEdge 420 stands out with its high-density architecture, optimized for virtualization and cloud applications. Equipped with Intel Xeon processors, it offers impressive processing power and scalability, supporting demanding workloads. With the ability to host multiple virtual machines, the 420 provides efficient resource utilization, ensuring that businesses can maximize their IT investments. The server also features advanced storage options, including the support for both traditional hard drives and solid-state drives, allowing for flexible data management and storage strategies.

In contrast, the Dell PowerEdge 220 and 220S are designed with simplicity and cost-effectiveness in mind. These servers feature tower and rack configurations that are ideal for environments with limited space. They leverage Intel's latest processor technologies, enhancing performance while maintaining energy efficiency. This makes the 220 series suitable for a variety of applications, including file and print services, web hosting, and database management.

One of the key characteristics of the Dell 220 and 220S is their ease of use. The systems are designed with straightforward setup procedures, allowing IT administrators to get them up and running quickly. Additionally, these servers come with Dell's OpenManage systems management tools, which offer comprehensive monitoring and management capabilities, enabling IT teams to maintain optimal server performance and reliability.

In terms of networking technologies, all three models support advanced network connectivity options, including multiple Ethernet ports and support for network interface cards (NICs) to ensure high-speed data transmission. Furthermore, they incorporate features such as redundancy in power supplies and cooling systems, enhancing overall system reliability and uptime.

Overall, the Dell 420, 220, and 220S represent a versatile range of server options that cater to varying business needs. With advancements in processing power, storage flexibility, and comprehensive management tools, these servers are well-suited for organizations looking to enhance their IT infrastructure while ensuring performance, reliability, and scalability.
Top Page Image Contents